QUANTITATIVE MULTISTAGE FRACTURING EFFICIENCY EVALUATION USING CROSS-WELL STRAIN MEASUREMENTS

Crosswell strain measurements acquired through low-frequency Distributed Acoustic Sensing (LF-DAS) is a maturing technique used to monitor and diagnose the efficiency of hydraulic fracturing treatments. While LF-DAS has demonstrated potential in characterizing far-field fracture communication and geometry, the prevailing analysis in this field has historically relied on qualitative interpretations, focusing on the timing and location of frac hits. In response to the evolving landscape of quantitative studies in this area, we present an advanced quantitative technique using our novel Green-function based inversion algorithm to calculate time-dependent far-field fracture width. The adopted algorithm utilizes the 3D displacement discontinuity method to relate fracture aperture to strains measured by LF-DAS along a monitor well during stimulation treatments. This approach is demonstrated on a subset of four treatment stages where Distributed Acoustic Sensing (DAS) and Distributed Temperature Sensing (DTS) were acquired within the injection well, alongside LF-DAS from a nearby monitor well. LF-DAS inversion results indicate the loss of zonal isolation in three of the monitored stages, leading to significantly smaller fracture widths at the monitor well for targeted treatment stages, and reactivated fractures in the adjacent previous stages. These interpretations are cross validated through the integration of in-well DAS and DTS analysis, where severe inter-stage fluid communication is observed. The inverted fracture widths quantify the impact on far-field fracture geometry associated with poor stage isolation and decreased fracturing efficiency. This new approach demonstrates the potential of LF-DAS for quantitative analysis and interpretation, facilitating improved understanding and optimization of hydraulic stimulation, going beyond its conventional qualitative role in fracturing diagnostics.