{"title":"常压下使用酒石酸溶液浸出氧化铜矿孔雀石的条件和浸出动力学研究","authors":"Feride N. Türk, Hasan Arslanoğlu","doi":"10.1007/s12666-024-03358-0","DOIUrl":null,"url":null,"abstract":"<p>In this study, the dissolution conditions and dissolution kinetics of copper from malachite in the presence of organic acid (C<sub>4</sub>H<sub>6</sub>O<sub>6</sub>) as an organic leaching reagent were examined. The effects of particle size, acid concentration, time, solid/liquid ratio, temperature, and mixing speed on the dissolution process of copper were investigated. According to the test results, optimum dissolution conditions are as follows: particle size was 74 µm; organic acid concentration was 0.2 mol/L; duration was 60 min; solid/liquid ratio was 1/10; the temperature was determined as 25 °C and the stirring speed was 300 rpm; and the copper extraction value was obtained as 73.18% under optimum experimental conditions. Kinetic models were applied to the dissolution efficiencies obtained to determine the dissolution kinetics of copper in the presence of organic acid, and it was found that the dissolution process was controlled by the film diffusion model. In light of the data obtained, it can be said that organic acid, which is an economical and environmentally friendly leaching reagent, can be used in the dissolution of copper from malachite <span>\\((\\text{Cu}(\\text{OH}{)}_{2}{\\text{CuCO}}_{3})\\)</span>, as well as in the leaching of other precious metals such as copper, zinc, and cobalt from oxide and carbonate ores.</p>","PeriodicalId":23224,"journal":{"name":"Transactions of The Indian Institute of Metals","volume":"50 1","pages":""},"PeriodicalIF":1.6000,"publicationDate":"2024-05-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Investigation of Leaching Conditions and Leaching Kinetics of Oxidized Copper Ore Malachite at Atmospheric Pressure Using Tartaric Acid Solution\",\"authors\":\"Feride N. Türk, Hasan Arslanoğlu\",\"doi\":\"10.1007/s12666-024-03358-0\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>In this study, the dissolution conditions and dissolution kinetics of copper from malachite in the presence of organic acid (C<sub>4</sub>H<sub>6</sub>O<sub>6</sub>) as an organic leaching reagent were examined. The effects of particle size, acid concentration, time, solid/liquid ratio, temperature, and mixing speed on the dissolution process of copper were investigated. According to the test results, optimum dissolution conditions are as follows: particle size was 74 µm; organic acid concentration was 0.2 mol/L; duration was 60 min; solid/liquid ratio was 1/10; the temperature was determined as 25 °C and the stirring speed was 300 rpm; and the copper extraction value was obtained as 73.18% under optimum experimental conditions. Kinetic models were applied to the dissolution efficiencies obtained to determine the dissolution kinetics of copper in the presence of organic acid, and it was found that the dissolution process was controlled by the film diffusion model. In light of the data obtained, it can be said that organic acid, which is an economical and environmentally friendly leaching reagent, can be used in the dissolution of copper from malachite <span>\\\\((\\\\text{Cu}(\\\\text{OH}{)}_{2}{\\\\text{CuCO}}_{3})\\\\)</span>, as well as in the leaching of other precious metals such as copper, zinc, and cobalt from oxide and carbonate ores.</p>\",\"PeriodicalId\":23224,\"journal\":{\"name\":\"Transactions of The Indian Institute of Metals\",\"volume\":\"50 1\",\"pages\":\"\"},\"PeriodicalIF\":1.6000,\"publicationDate\":\"2024-05-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Transactions of The Indian Institute of Metals\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1007/s12666-024-03358-0\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"Materials Science\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Transactions of The Indian Institute of Metals","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s12666-024-03358-0","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"Materials Science","Score":null,"Total":0}
Investigation of Leaching Conditions and Leaching Kinetics of Oxidized Copper Ore Malachite at Atmospheric Pressure Using Tartaric Acid Solution
In this study, the dissolution conditions and dissolution kinetics of copper from malachite in the presence of organic acid (C4H6O6) as an organic leaching reagent were examined. The effects of particle size, acid concentration, time, solid/liquid ratio, temperature, and mixing speed on the dissolution process of copper were investigated. According to the test results, optimum dissolution conditions are as follows: particle size was 74 µm; organic acid concentration was 0.2 mol/L; duration was 60 min; solid/liquid ratio was 1/10; the temperature was determined as 25 °C and the stirring speed was 300 rpm; and the copper extraction value was obtained as 73.18% under optimum experimental conditions. Kinetic models were applied to the dissolution efficiencies obtained to determine the dissolution kinetics of copper in the presence of organic acid, and it was found that the dissolution process was controlled by the film diffusion model. In light of the data obtained, it can be said that organic acid, which is an economical and environmentally friendly leaching reagent, can be used in the dissolution of copper from malachite \((\text{Cu}(\text{OH}{)}_{2}{\text{CuCO}}_{3})\), as well as in the leaching of other precious metals such as copper, zinc, and cobalt from oxide and carbonate ores.
期刊介绍:
Transactions of the Indian Institute of Metals publishes original research articles and reviews on ferrous and non-ferrous process metallurgy, structural and functional materials development, physical, chemical and mechanical metallurgy, welding science and technology, metal forming, particulate technologies, surface engineering, characterization of materials, thermodynamics and kinetics, materials modelling and other allied branches of Metallurgy and Materials Engineering.
Transactions of the Indian Institute of Metals also serves as a forum for rapid publication of recent advances in all the branches of Metallurgy and Materials Engineering. The technical content of the journal is scrutinized by the Editorial Board composed of experts from various disciplines of Metallurgy and Materials Engineering. Editorial Advisory Board provides valuable advice on technical matters related to the publication of Transactions.