Simultaneous measurement of thermal conductivity and emissivity of micro/nanomaterials

Although thermal conductivity of micro/nano scale material has been readily measured, the high specific surface area leads to non-negligible radiative heat transfer. Here, a method for simultaneous measurement of intrinsic thermal conductivity and emissivity of micro/nano materials was developed and verified. The physical model of this measurement principle consisted of two parallel platinum wires, which serve as both heaters and heat flux meters. Thermal conductivity and emissivity can be derived by comparing the changes in the average temperature rise of the heater and sensor platinum wires before and after attaching the test sample. The thermal conductivity and emissivity of an individual platinum wire were determined to 71.7 W/(m·K) and 0.14, which are consistent with the reference values. Subsequently, the thermal conductivity and emissivity of the polymer composite fiber were measured to be 1.45 W/(m·K), 0.73 and 1.87 W/(m·K), 0.8 at different composite filler concentrations. In principle, this method is applicable for accurately measuring the thermal transport properties of any micro/nano wires using appropriate sensors.