基于超声化学制备的低维金纳米粒子装饰氧化锌-壳聚糖纳米复合材料的线性扫描伏安法高效测定 2-硝基苯酚

IF 6.7 3区 材料科学 Q1 MATERIALS SCIENCE, MULTIDISCIPLINARY
M. Faisal , M.M. Alam , Mabkhoot Alsaiari , Jahir Ahmed , Jehan Y. Al-Humaidi , Jari S. Algethami , Mohamed A. Abdel-Fadeel , Raed H. Althomali , Farid A. Harraz , Mohammed M. Rahman
{"title":"基于超声化学制备的低维金纳米粒子装饰氧化锌-壳聚糖纳米复合材料的线性扫描伏安法高效测定 2-硝基苯酚","authors":"M. Faisal ,&nbsp;M.M. Alam ,&nbsp;Mabkhoot Alsaiari ,&nbsp;Jahir Ahmed ,&nbsp;Jehan Y. Al-Humaidi ,&nbsp;Jari S. Algethami ,&nbsp;Mohamed A. Abdel-Fadeel ,&nbsp;Raed H. Althomali ,&nbsp;Farid A. Harraz ,&nbsp;Mohammed M. Rahman","doi":"10.1016/j.jsamd.2024.100727","DOIUrl":null,"url":null,"abstract":"<div><p>In this study, linear sweep voltammetry (LSV) was implemented for the sensitive detection of 2-nitrophenol (2-NP) in phosphate buffer solution (PBS) at pH 7.00 with lab-made nanocomposite materials for environmental remediation. Initially, a flat glassy carbon electrode (GCE) modified using the inorganic-organic binary Au-NPs@ZnO/CTSN(Chitosan) nanocomposites (NCs) was used as a working electrode (WE). The NCs of Au NPs@ZnO/CTSN were basically prepared by an ultra-sonochemical process and fabricated on a GCE using conducting coating binder such as PEDOT:PSS. Before the electrochemical examination, the Au NPs@ZnO/CTSN NC was fully characterized by Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), Energy-dispersive X-ray Spectroscopy (EDS), Brunauer-Emmett-Teller (BET), X-Ray Diffraction analysis (XRD), High-Resolution Transmission Electron Microscopy (HRTEM), and X-Ray Photoelectron Spectroscopy (XPS) to analyze the functional, morphological, structural, elemental, surface area, crystallinity, and binding energy analyses. A linear concentration range (LDR) of 2-NP from 15⁓150 μM was evaluated by LSV in room conditions. From the slope of the calibration curve, the sensor sensitivity was calculated and found to be 20.9905 μAμM<sup>−1</sup>cm<sup>−2</sup>. At signal/noise ratio of 3, the lower limit of detection (LOD) is obtained as 0.45 ± 0.023 μM. Additionally, pH optimization, sensor-probe characterization, stability, and validity are fully analyzed in identical conditions by LSV. Besides this, the assembled 2-NP sensor probe as Au NPs@ZnO/CTSN NCs/PEDOT:PSS/GCE for validity test was performed elaborately and found the reliable and satisfactory results. This is a new approach to the development of electrochemical sensors for environmental chemical analysis using an electrochemical process with gold-nanoparticle decorated ZnO-chitosan for the safety of environmental and healthcare fields on a broad scale.</p></div>","PeriodicalId":17219,"journal":{"name":"Journal of Science: Advanced Materials and Devices","volume":"9 3","pages":"Article 100727"},"PeriodicalIF":6.7000,"publicationDate":"2024-04-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.sciencedirect.com/science/article/pii/S2468217924000583/pdfft?md5=a7f11bc601352c36c58f09e7aaaad763&pid=1-s2.0-S2468217924000583-main.pdf","citationCount":"0","resultStr":"{\"title\":\"Efficient 2-Nitrophenol determination based on ultra-sonochemically prepared low-dimensional Au-nanoparticles decorated ZnO-chitosan nanocomposites by linear sweep voltammetry\",\"authors\":\"M. Faisal ,&nbsp;M.M. Alam ,&nbsp;Mabkhoot Alsaiari ,&nbsp;Jahir Ahmed ,&nbsp;Jehan Y. Al-Humaidi ,&nbsp;Jari S. Algethami ,&nbsp;Mohamed A. Abdel-Fadeel ,&nbsp;Raed H. Althomali ,&nbsp;Farid A. Harraz ,&nbsp;Mohammed M. Rahman\",\"doi\":\"10.1016/j.jsamd.2024.100727\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>In this study, linear sweep voltammetry (LSV) was implemented for the sensitive detection of 2-nitrophenol (2-NP) in phosphate buffer solution (PBS) at pH 7.00 with lab-made nanocomposite materials for environmental remediation. Initially, a flat glassy carbon electrode (GCE) modified using the inorganic-organic binary Au-NPs@ZnO/CTSN(Chitosan) nanocomposites (NCs) was used as a working electrode (WE). The NCs of Au NPs@ZnO/CTSN were basically prepared by an ultra-sonochemical process and fabricated on a GCE using conducting coating binder such as PEDOT:PSS. Before the electrochemical examination, the Au NPs@ZnO/CTSN NC was fully characterized by Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), Energy-dispersive X-ray Spectroscopy (EDS), Brunauer-Emmett-Teller (BET), X-Ray Diffraction analysis (XRD), High-Resolution Transmission Electron Microscopy (HRTEM), and X-Ray Photoelectron Spectroscopy (XPS) to analyze the functional, morphological, structural, elemental, surface area, crystallinity, and binding energy analyses. A linear concentration range (LDR) of 2-NP from 15⁓150 μM was evaluated by LSV in room conditions. From the slope of the calibration curve, the sensor sensitivity was calculated and found to be 20.9905 μAμM<sup>−1</sup>cm<sup>−2</sup>. At signal/noise ratio of 3, the lower limit of detection (LOD) is obtained as 0.45 ± 0.023 μM. Additionally, pH optimization, sensor-probe characterization, stability, and validity are fully analyzed in identical conditions by LSV. Besides this, the assembled 2-NP sensor probe as Au NPs@ZnO/CTSN NCs/PEDOT:PSS/GCE for validity test was performed elaborately and found the reliable and satisfactory results. This is a new approach to the development of electrochemical sensors for environmental chemical analysis using an electrochemical process with gold-nanoparticle decorated ZnO-chitosan for the safety of environmental and healthcare fields on a broad scale.</p></div>\",\"PeriodicalId\":17219,\"journal\":{\"name\":\"Journal of Science: Advanced Materials and Devices\",\"volume\":\"9 3\",\"pages\":\"Article 100727\"},\"PeriodicalIF\":6.7000,\"publicationDate\":\"2024-04-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.sciencedirect.com/science/article/pii/S2468217924000583/pdfft?md5=a7f11bc601352c36c58f09e7aaaad763&pid=1-s2.0-S2468217924000583-main.pdf\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Science: Advanced Materials and Devices\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2468217924000583\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Science: Advanced Materials and Devices","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2468217924000583","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

本研究利用实验室自制的纳米复合材料,对 pH 值为 7.00 的磷酸盐缓冲溶液(PBS)中的 2-硝基苯酚(2-NP)进行了线性扫描伏安法(LSV)灵敏检测,用于环境修复。最初,使用无机-有机二元 Au-NPs@ZnO/CTSN (Chitosan) 纳米复合材料(NCs)修饰的平面玻璃碳电极(GCE)作为工作电极(WE)。Au NPs@ZnO/CTSN 纳米复合材料基本上是通过超声化学工艺制备的,并使用导电涂层粘合剂(如 PEDOT:PSS)在 GCE 上制作而成。在进行电化学测试之前,通过傅立叶变换红外光谱(FTIR)、场发射扫描电子显微镜(FESEM)、能量色散 X 射线光谱(EDS)、Brunauer-Emmett-Teller(BET)对 Au NPs@ZnO/CTSN NC 进行了全面表征、X 射线衍射分析 (XRD)、高分辨率透射电子显微镜 (HRTEM) 和 X 射线光电子能谱 (XPS),以分析功能、形态、结构、元素、表面积、结晶度和结合能。在室内条件下,用 LSV 评估了 2-NP 在 15⁓150 μM 的线性浓度范围(LDR)。根据校准曲线的斜率计算出传感器的灵敏度为 20.9905 μAμM-1cm-2。信噪比为 3 时,检测下限(LOD)为 0.45 ± 0.023 μM。此外,LSV 还对相同条件下的 pH 值优化、传感器-探针特性、稳定性和有效性进行了全面分析。此外,还对组装成 Au NPs@ZnO/CTSN NCs/PEDOT:PSS/GCE 的 2-NP 传感器探针进行了详细的有效性测试,结果可靠、令人满意。这是利用金纳米粒子装饰 ZnO 壳聚糖的电化学过程开发用于环境化学分析的电化学传感器的一种新方法,可广泛应用于环境和医疗保健领域的安全检测。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Efficient 2-Nitrophenol determination based on ultra-sonochemically prepared low-dimensional Au-nanoparticles decorated ZnO-chitosan nanocomposites by linear sweep voltammetry

In this study, linear sweep voltammetry (LSV) was implemented for the sensitive detection of 2-nitrophenol (2-NP) in phosphate buffer solution (PBS) at pH 7.00 with lab-made nanocomposite materials for environmental remediation. Initially, a flat glassy carbon electrode (GCE) modified using the inorganic-organic binary Au-NPs@ZnO/CTSN(Chitosan) nanocomposites (NCs) was used as a working electrode (WE). The NCs of Au NPs@ZnO/CTSN were basically prepared by an ultra-sonochemical process and fabricated on a GCE using conducting coating binder such as PEDOT:PSS. Before the electrochemical examination, the Au NPs@ZnO/CTSN NC was fully characterized by Fourier Transform Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FESEM), Energy-dispersive X-ray Spectroscopy (EDS), Brunauer-Emmett-Teller (BET), X-Ray Diffraction analysis (XRD), High-Resolution Transmission Electron Microscopy (HRTEM), and X-Ray Photoelectron Spectroscopy (XPS) to analyze the functional, morphological, structural, elemental, surface area, crystallinity, and binding energy analyses. A linear concentration range (LDR) of 2-NP from 15⁓150 μM was evaluated by LSV in room conditions. From the slope of the calibration curve, the sensor sensitivity was calculated and found to be 20.9905 μAμM−1cm−2. At signal/noise ratio of 3, the lower limit of detection (LOD) is obtained as 0.45 ± 0.023 μM. Additionally, pH optimization, sensor-probe characterization, stability, and validity are fully analyzed in identical conditions by LSV. Besides this, the assembled 2-NP sensor probe as Au NPs@ZnO/CTSN NCs/PEDOT:PSS/GCE for validity test was performed elaborately and found the reliable and satisfactory results. This is a new approach to the development of electrochemical sensors for environmental chemical analysis using an electrochemical process with gold-nanoparticle decorated ZnO-chitosan for the safety of environmental and healthcare fields on a broad scale.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Journal of Science: Advanced Materials and Devices
Journal of Science: Advanced Materials and Devices Materials Science-Electronic, Optical and Magnetic Materials
CiteScore
11.90
自引率
2.50%
发文量
88
审稿时长
47 days
期刊介绍: In 1985, the Journal of Science was founded as a platform for publishing national and international research papers across various disciplines, including natural sciences, technology, social sciences, and humanities. Over the years, the journal has experienced remarkable growth in terms of quality, size, and scope. Today, it encompasses a diverse range of publications dedicated to academic research. Considering the rapid expansion of materials science, we are pleased to introduce the Journal of Science: Advanced Materials and Devices. This new addition to our journal series offers researchers an exciting opportunity to publish their work on all aspects of materials science and technology within the esteemed Journal of Science. With this development, we aim to revolutionize the way research in materials science is expressed and organized, further strengthening our commitment to promoting outstanding research across various scientific and technological fields.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信