利用应变硬化预测未老化和老化黑色光滑高密度聚乙烯土工膜的抗应力开裂性能

IF 4.7 1区 工程技术 Q1 ENGINEERING, GEOLOGICAL
M. Ali, R. Kerry Rowe, F.B. Abdelaal
{"title":"利用应变硬化预测未老化和老化黑色光滑高密度聚乙烯土工膜的抗应力开裂性能","authors":"M. Ali,&nbsp;R. Kerry Rowe,&nbsp;F.B. Abdelaal","doi":"10.1016/j.geotexmem.2024.03.003","DOIUrl":null,"url":null,"abstract":"<div><p>The correlation between the single-point notched constant tensile load-stress crack resistance (SP-NCTL SCR) Test (ASTM D5397; Appendix) of smooth high density polyethylene (HDPE) geomembranes and their strain hardening modulus is investigated for both unaged and aged specimens. The strain hardening modulus was calculated based on the (force-elongation) raw data from the tensile strength test conducted at room temperature using Type IV and/or Type V specimens (as described in ASTM D638) at a test speed of 7 mm/min. Three different approaches are used to define the strain hardening modulus and to compare the representative strain hardening modulus with the SP-NCTL SCR. It is shown that the high test speed of 7 mm/min performed at room temperature provides a good correlation with the SP-NCTL SCR of different smooth black HDPE geomembranes. Additionally, the proposed method using Type V specimens predicts the SCR values during oxidative degradation close to those observed using the SP-NCTL SCR test. For the resins and conditions examined, the proposed method provides a quick assessment of the SP-NCTL SCR of unaged geomembranes when the SP-NCTL SCR takes long testing times (e.g., &gt;1000 h) or in jurisdictions in which the use of surfactants becomes prohibited to allow conducting the SP-NCTL SCR tests.</p></div>","PeriodicalId":55096,"journal":{"name":"Geotextiles and Geomembranes","volume":null,"pages":null},"PeriodicalIF":4.7000,"publicationDate":"2024-04-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Using strain hardening to predict the stress crack resistance of unaged and aged smooth black HDPE geomembranes\",\"authors\":\"M. Ali,&nbsp;R. Kerry Rowe,&nbsp;F.B. Abdelaal\",\"doi\":\"10.1016/j.geotexmem.2024.03.003\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>The correlation between the single-point notched constant tensile load-stress crack resistance (SP-NCTL SCR) Test (ASTM D5397; Appendix) of smooth high density polyethylene (HDPE) geomembranes and their strain hardening modulus is investigated for both unaged and aged specimens. The strain hardening modulus was calculated based on the (force-elongation) raw data from the tensile strength test conducted at room temperature using Type IV and/or Type V specimens (as described in ASTM D638) at a test speed of 7 mm/min. Three different approaches are used to define the strain hardening modulus and to compare the representative strain hardening modulus with the SP-NCTL SCR. It is shown that the high test speed of 7 mm/min performed at room temperature provides a good correlation with the SP-NCTL SCR of different smooth black HDPE geomembranes. Additionally, the proposed method using Type V specimens predicts the SCR values during oxidative degradation close to those observed using the SP-NCTL SCR test. For the resins and conditions examined, the proposed method provides a quick assessment of the SP-NCTL SCR of unaged geomembranes when the SP-NCTL SCR takes long testing times (e.g., &gt;1000 h) or in jurisdictions in which the use of surfactants becomes prohibited to allow conducting the SP-NCTL SCR tests.</p></div>\",\"PeriodicalId\":55096,\"journal\":{\"name\":\"Geotextiles and Geomembranes\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.7000,\"publicationDate\":\"2024-04-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Geotextiles and Geomembranes\",\"FirstCategoryId\":\"89\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0266114424000244\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, GEOLOGICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Geotextiles and Geomembranes","FirstCategoryId":"89","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0266114424000244","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, GEOLOGICAL","Score":null,"Total":0}
引用次数: 0

摘要

针对未老化和老化试样,研究了光滑高密度聚乙烯(HDPE)土工膜的单点缺口恒定拉伸载荷-应力抗裂性(SP-NCTL SCR)测试(ASTM D5397;附录)与其应变硬化模量之间的相关性。应变硬化模量是根据室温下使用 IV 型和/或 V 型试样(如 ASTM D638 所述)以 7 毫米/分钟的测试速度进行拉伸强度测试的(力-伸长)原始数据计算得出的。使用三种不同的方法来定义应变硬化模量,并将代表性应变硬化模量与 SP-NCTL SCR 进行比较。结果表明,在室温下以 7 毫米/分钟的高测试速度进行的测试与不同黑色光滑高密度聚乙烯土工膜的 SP-NCTL SCR 具有良好的相关性。此外,使用 V 型试样的拟议方法预测的氧化降解过程中的 SCR 值接近使用 SP-NCTL SCR 测试观察到的值。对于所研究的树脂和条件,当 SP-NCTL SCR 测试时间较长(例如 1000 小时)或在禁止使用表面活性剂以进行 SP-NCTL SCR 测试的地区,所提出的方法可快速评估未老化土工膜的 SP-NCTL SCR。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Using strain hardening to predict the stress crack resistance of unaged and aged smooth black HDPE geomembranes

The correlation between the single-point notched constant tensile load-stress crack resistance (SP-NCTL SCR) Test (ASTM D5397; Appendix) of smooth high density polyethylene (HDPE) geomembranes and their strain hardening modulus is investigated for both unaged and aged specimens. The strain hardening modulus was calculated based on the (force-elongation) raw data from the tensile strength test conducted at room temperature using Type IV and/or Type V specimens (as described in ASTM D638) at a test speed of 7 mm/min. Three different approaches are used to define the strain hardening modulus and to compare the representative strain hardening modulus with the SP-NCTL SCR. It is shown that the high test speed of 7 mm/min performed at room temperature provides a good correlation with the SP-NCTL SCR of different smooth black HDPE geomembranes. Additionally, the proposed method using Type V specimens predicts the SCR values during oxidative degradation close to those observed using the SP-NCTL SCR test. For the resins and conditions examined, the proposed method provides a quick assessment of the SP-NCTL SCR of unaged geomembranes when the SP-NCTL SCR takes long testing times (e.g., >1000 h) or in jurisdictions in which the use of surfactants becomes prohibited to allow conducting the SP-NCTL SCR tests.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Geotextiles and Geomembranes
Geotextiles and Geomembranes 地学-地球科学综合
CiteScore
9.50
自引率
21.20%
发文量
111
审稿时长
59 days
期刊介绍: The range of products and their applications has expanded rapidly over the last decade with geotextiles and geomembranes being specified world wide. This rapid growth is paralleled by a virtual explosion of technology. Current reference books and even manufacturers' sponsored publications tend to date very quickly and the need for a vehicle to bring together and discuss the growing body of technology now available has become evident. Geotextiles and Geomembranes fills this need and provides a forum for the dissemination of information amongst research workers, designers, users and manufacturers. By providing a growing fund of information the journal increases general awareness, prompts further research and assists in the establishment of international codes and regulations.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信