Influence of NaOH Concentration on Structural, Morphological, Optical, and Electrical Characterization of Perovskite Sodium Bismuth Titanate Prepared by Hydrothermal Method.

The hydrothermal method successfully prepares a lead-free sodium bismuth titanate (NBT) perovskite film. The prepared films were studied structurally, and morphologically using X-ray diffraction, and field-emission scanning electron microscopy (FESEM), respectively. Varying the concentration of NaOH showed a noticeable effect on the properties studied. Good crystallization of NBT perovskite films without impurities was obtained at 18 and 20 M concentrations, where the crystalline size was 14 nm according to the Scherer equation. Also, when varying the concentration of NaOH, a similar film thickness was obtained through a cross-section of the FESEM images. It was observed that there was a difference in the intensity of the peaks of the photoluminescence spectra of the prepared films with a change in the concentration of NaOH, which confirms a change in the concentration of oxygen vacancies. The activation energy of the prepared films was deduced from the Arrhenius plot, as it showed small values in the films prepared with a low concentration of NaOH. The results showed that the maximum value of mobility of NBT films was at 20 M of NaOH concentration through the Hall Effect.