Development of new improved plastic collapse moment equations of pressurized different angled pipe bends under bending moments

In a piping system, pipe bends are more flexible than straight pipes because of their curved geometry, supplemented by higher stress and strain concentration, leading to one of the crucial components in piping industries. Therefore, safe design of pipe bends is essential for smooth running of the piping system, and plastic collapse moment is one of its criteria. This paper utilizes three-dimensional finite element analyses to model empirical solutions for the plastic collapse moment for different angled pipe bends subjected to combined pressure and in-plane closing, in-plane opening, and out-of-plane bending moments. Plastic collapse moments for 30∘ to 180∘ pipe bends are determined for elastic perfectly plastic and strain hardening materials, employing large geometry change option and internal pressure effect. It is observed from results that pressure effect is more prominent in thinner pipe bends of larger bend angle under all bending cases. For in-plane opening and out-of-plane bending moments, collapse moment increases and then decreases with increase in pressure intensity for all sizes of pipe bend. However, for in-plane opening bending moment, collapse moments keep on decreasing for thicker ([Formula: see text] = 11.33) pipe bends. Finally, the study presents new improved plastic collapse moment solutions for different angled pipe bends under bending moment and internal pressure, derived from the finite element results of elastic perfectly plastic and strain hardening material models.