SQUEAKY CLEAN CELLULOSE: COMPARING PRETREATMENT EFFECTIVENESS ON SINGLE TREE RINGS AND WOODEN LATHS

Obtaining accurate radiocarbon (14C) results from wood samples requires the extraction of cellulose. In the past, this has been done using different combinations of methods including acidified bleaching, acid-base-acid, and strong bases. This often becomes a time-consuming task in most analyses, especially when single ring isotope chronologies are needed from wood samples. Using 14C and Fourier-transform infrared spectroscopy (FTIR), we tested four different pretreatment methods to determine their ability to produce high quality cellulose. We then adjusted the best methods to determine a method for pretreating wood laths of multiple rings. A sequence of base-acid-base-acid-bleach + strong base (BABAB+) and BABAB produced the most accurate results when compared to the Bomb20 Northern Hemisphere Zone 1 curve with an average difference in Δ14C of 1.3‰ and 5.8‰ respectively. These methods were adjusted to pretreat an entire wood lath and a comparison of the FTIR results suggest that our adjusted BABAB+ and BABAB produced high quality cellulose comparable to that of an individually pretreated ring. The possibility to pretreat wood lath samples has the potential to more than double the number of tree rings which can be pretreated in a week. This is a significant reduction in time when creating long tree ring chronologies.