利用衍射现象保护路边物体不受噪音影响

IF 1.7 Q2 ACOUSTICS
Petr Louda, O. Sharko, Dmitro Stepanchikov, A. Sharko, K. Buczkowska
{"title":"利用衍射现象保护路边物体不受噪音影响","authors":"Petr Louda, O. Sharko, Dmitro Stepanchikov, A. Sharko, K. Buczkowska","doi":"10.1515/noise-2022-0171","DOIUrl":null,"url":null,"abstract":"\n Presented here is a constructive solution to the challenge of utilizing the diffraction phenomenon for mitigating noise around roadside objects caused by the movement of vehicles on transportation routes. In contrast to existing prototypes, the innovation of the proposed solution lies in the creation of an active system that concentrates and directs oscillations originating from transportation sources. This active system, centered around sound absorption and reflection, establishes protective barriers and focuses on sound vibrations. The incorporation of diffraction effects within the Fraunhofer zones, along with the utilization of Fresnel lenses, directs attention towards these vibrations. The technical objective of harnessing the diffraction phenomenon for noise reduction around roadside objects involves demonstrating the feasibility of using a Fresnel zone plate (FZP) tailored for a specific oscillation frequency. This plate should demonstrate the ability to effectively manipulate sounds of varying frequencies while retaining its diffractive focusing capabilities. The intrinsic frequency characteristics of diffractive elements cannot be eliminated due to the inherent nature of sound diffraction. Consequently, it is imperative to thoroughly investigate and account for these properties. A groundbreaking discovery has been made, confirming the phenomenon of noise concentration originating from transportation sources. This revelation suggests that when a FZP is employed at frequencies other than its designed frequency, the concentration of oscillations remains. However, only the focal point of concentration shifts. Through experimentation, it has been established that the same FZP can be employed for varying wavelengths within a range of approximately ±20% while adhering to diffraction conditions. The feasibility of employing the thin lens formula to focus oscillations following the passage through a FZP has been substantiated. This solution also delves into the principal focusing, frequency, and shaping characteristics of the diffractive elements within FZPs. Furthermore, a computed estimation of the acoustic field scattered by a diffraction grating is compared against experimental data. This validates the approach and its efficacy in practical scenarios. The potential of harnessing the diffraction phenomenon to concentrate and regulate noise from transportation sources, thereby safeguarding roadside objects, is presented as a promising avenue for exploration.","PeriodicalId":44086,"journal":{"name":"Noise Mapping","volume":null,"pages":null},"PeriodicalIF":1.7000,"publicationDate":"2024-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Utilizing the phenomenon of diffraction for noise protection of roadside objects\",\"authors\":\"Petr Louda, O. Sharko, Dmitro Stepanchikov, A. Sharko, K. Buczkowska\",\"doi\":\"10.1515/noise-2022-0171\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n Presented here is a constructive solution to the challenge of utilizing the diffraction phenomenon for mitigating noise around roadside objects caused by the movement of vehicles on transportation routes. In contrast to existing prototypes, the innovation of the proposed solution lies in the creation of an active system that concentrates and directs oscillations originating from transportation sources. This active system, centered around sound absorption and reflection, establishes protective barriers and focuses on sound vibrations. The incorporation of diffraction effects within the Fraunhofer zones, along with the utilization of Fresnel lenses, directs attention towards these vibrations. The technical objective of harnessing the diffraction phenomenon for noise reduction around roadside objects involves demonstrating the feasibility of using a Fresnel zone plate (FZP) tailored for a specific oscillation frequency. This plate should demonstrate the ability to effectively manipulate sounds of varying frequencies while retaining its diffractive focusing capabilities. The intrinsic frequency characteristics of diffractive elements cannot be eliminated due to the inherent nature of sound diffraction. Consequently, it is imperative to thoroughly investigate and account for these properties. A groundbreaking discovery has been made, confirming the phenomenon of noise concentration originating from transportation sources. This revelation suggests that when a FZP is employed at frequencies other than its designed frequency, the concentration of oscillations remains. However, only the focal point of concentration shifts. Through experimentation, it has been established that the same FZP can be employed for varying wavelengths within a range of approximately ±20% while adhering to diffraction conditions. The feasibility of employing the thin lens formula to focus oscillations following the passage through a FZP has been substantiated. This solution also delves into the principal focusing, frequency, and shaping characteristics of the diffractive elements within FZPs. Furthermore, a computed estimation of the acoustic field scattered by a diffraction grating is compared against experimental data. This validates the approach and its efficacy in practical scenarios. The potential of harnessing the diffraction phenomenon to concentrate and regulate noise from transportation sources, thereby safeguarding roadside objects, is presented as a promising avenue for exploration.\",\"PeriodicalId\":44086,\"journal\":{\"name\":\"Noise Mapping\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.7000,\"publicationDate\":\"2024-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Noise Mapping\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1515/noise-2022-0171\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ACOUSTICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Noise Mapping","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1515/noise-2022-0171","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ACOUSTICS","Score":null,"Total":0}
引用次数: 0

摘要

本文提出了一种建设性解决方案,以应对利用衍射现象减轻交通路线上车辆行驶造成的路边物体周围噪音这一挑战。与现有的原型相比,该解决方案的创新之处在于创建了一个主动系统,可集中和引导来自交通源头的振动。这种主动系统以吸声和反射为中心,建立起保护屏障,集中处理声音振动。弗劳恩霍夫区域内的衍射效应以及菲涅尔透镜的使用,将人们的注意力引向这些振动。利用衍射现象降低路边物体周围噪音的技术目标包括证明使用为特定振动频率量身定制的菲涅尔区域板(FZP)的可行性。该板应能有效处理不同频率的声音,同时保持其衍射聚焦能力。由于声音衍射的固有特性,衍射元件的内在频率特性无法消除。因此,必须对这些特性进行彻底研究和解释。一项突破性的发现证实了来自交通噪声源的噪声集中现象。这一发现表明,当使用频率高于设计频率的分区振荡器时,振荡的集中现象依然存在。不过,只是集中的焦点发生了变化。通过实验,可以确定在符合衍射条件的情况下,同一 FZP 可用于在大约 ±20% 的范围内改变波长。采用薄透镜公式对通过 FZP 后的振荡进行聚焦的可行性已得到证实。该解决方案还深入探讨了 FZP 内衍射元件的主要聚焦、频率和成型特性。此外,还将计算得出的衍射光栅散射声场估计值与实验数据进行了比较。这验证了该方法及其在实际应用中的有效性。利用衍射现象来集中和调节来自交通源的噪声,从而保护路边物体,是一个很有潜力的探索方向。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Utilizing the phenomenon of diffraction for noise protection of roadside objects
Presented here is a constructive solution to the challenge of utilizing the diffraction phenomenon for mitigating noise around roadside objects caused by the movement of vehicles on transportation routes. In contrast to existing prototypes, the innovation of the proposed solution lies in the creation of an active system that concentrates and directs oscillations originating from transportation sources. This active system, centered around sound absorption and reflection, establishes protective barriers and focuses on sound vibrations. The incorporation of diffraction effects within the Fraunhofer zones, along with the utilization of Fresnel lenses, directs attention towards these vibrations. The technical objective of harnessing the diffraction phenomenon for noise reduction around roadside objects involves demonstrating the feasibility of using a Fresnel zone plate (FZP) tailored for a specific oscillation frequency. This plate should demonstrate the ability to effectively manipulate sounds of varying frequencies while retaining its diffractive focusing capabilities. The intrinsic frequency characteristics of diffractive elements cannot be eliminated due to the inherent nature of sound diffraction. Consequently, it is imperative to thoroughly investigate and account for these properties. A groundbreaking discovery has been made, confirming the phenomenon of noise concentration originating from transportation sources. This revelation suggests that when a FZP is employed at frequencies other than its designed frequency, the concentration of oscillations remains. However, only the focal point of concentration shifts. Through experimentation, it has been established that the same FZP can be employed for varying wavelengths within a range of approximately ±20% while adhering to diffraction conditions. The feasibility of employing the thin lens formula to focus oscillations following the passage through a FZP has been substantiated. This solution also delves into the principal focusing, frequency, and shaping characteristics of the diffractive elements within FZPs. Furthermore, a computed estimation of the acoustic field scattered by a diffraction grating is compared against experimental data. This validates the approach and its efficacy in practical scenarios. The potential of harnessing the diffraction phenomenon to concentrate and regulate noise from transportation sources, thereby safeguarding roadside objects, is presented as a promising avenue for exploration.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Noise Mapping
Noise Mapping ACOUSTICS-
CiteScore
7.80
自引率
17.90%
发文量
5
审稿时长
12 weeks
期刊介绍: Ever since its inception, Noise Mapping has been offering fast and comprehensive peer-review, while featuring prominent researchers among its Advisory Board. As a result, the journal is set to acquire a growing reputation as the main publication in the field of noise mapping, thus leading to a significant Impact Factor. The journal aims to promote and disseminate knowledge on noise mapping through the publication of high quality peer-reviewed papers focusing on the following aspects: noise mapping and noise action plans: case studies; models and algorithms for source characterization and outdoor sound propagation: proposals, applications, comparisons, round robin tests; local, national and international policies and good practices for noise mapping, planning, management and control; evaluation of noise mitigation actions; evaluation of environmental noise exposure; actions and communications to increase public awareness of environmental noise issues; outdoor soundscape studies and mapping; classification, evaluation and preservation of quiet areas.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信