太阳能电池板温度对电池板输出性能的影响分析

Q4 Engineering

Journal of Mechanical Engineering Pub Date : 2024-01-29 DOI:10.47134/jme.v1i1.2189

Jaya Harie Satiyadi, Rahmat Muhamad Hudan, Asrori Asrori

{"title":"太阳能电池板温度对电池板输出性能的影响分析","authors":"Jaya Harie Satiyadi, Rahmat Muhamad Hudan, Asrori Asrori","doi":"10.47134/jme.v1i1.2189","DOIUrl":null,"url":null,"abstract":"The main obstacle that greatly affects solar power output systems is the low conversion efficiency of solar panels, which is greatly influenced by their operating temperature. Failure to consider solar panel temperature increases the financial risks of installing the installation system. In this research, the output performance of solar panels was examined in outdoor conditions. All data was measured and recorded from 09.00 to 17.00, over 30 minute intervals. Panel temperature measurements were carried out using a Ditec C355 infrared thermometer. And then compared with using Pvsyst software. The output power of a solar panel is highly dependent on the solar radiation that falls on its surface. The amount of incoming sunlight is much higher during the hours from 11.00 to 13.00, which can be determined as the peak of the sun during the day. So it can be concluded that the ideal climate for setting up a large solar installation system is a cool and sunny climate.","PeriodicalId":16332,"journal":{"name":"Journal of Mechanical Engineering","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2024-01-29","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Analisis Pengaruh Suhu Panel Surya Terhadap Output Panel Performance\",\"authors\":\"Jaya Harie Satiyadi, Rahmat Muhamad Hudan, Asrori Asrori\",\"doi\":\"10.47134/jme.v1i1.2189\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The main obstacle that greatly affects solar power output systems is the low conversion efficiency of solar panels, which is greatly influenced by their operating temperature. Failure to consider solar panel temperature increases the financial risks of installing the installation system. In this research, the output performance of solar panels was examined in outdoor conditions. All data was measured and recorded from 09.00 to 17.00, over 30 minute intervals. Panel temperature measurements were carried out using a Ditec C355 infrared thermometer. And then compared with using Pvsyst software. The output power of a solar panel is highly dependent on the solar radiation that falls on its surface. The amount of incoming sunlight is much higher during the hours from 11.00 to 13.00, which can be determined as the peak of the sun during the day. So it can be concluded that the ideal climate for setting up a large solar installation system is a cool and sunny climate.\",\"PeriodicalId\":16332,\"journal\":{\"name\":\"Journal of Mechanical Engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-01-29\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Mechanical Engineering\",\"FirstCategoryId\":\"1087\",\"ListUrlMain\":\"https://doi.org/10.47134/jme.v1i1.2189\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"Engineering\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Mechanical Engineering","FirstCategoryId":"1087","ListUrlMain":"https://doi.org/10.47134/jme.v1i1.2189","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Engineering","Score":null,"Total":0}

引用次数: 0

摘要

影响太阳能发电系统的主要障碍是太阳能电池板的转换效率低，这在很大程度上受其工作温度的影响。如果不考虑太阳能电池板的温度，就会增加安装系统的财务风险。本研究考察了太阳能电池板在室外条件下的输出性能。所有数据的测量和记录时间为 9:00 至 17:00，间隔时间为 30 分钟。电池板温度测量使用 Ditec C355 红外测温仪进行。然后使用 Pvsyst 软件进行比较。太阳能电池板的输出功率在很大程度上取决于落在其表面的太阳辐射。11:00 至 13:00 这段时间的日照量更高，可以确定为一天中太阳的最高峰。因此，可以得出结论，建立大型太阳能安装系统的理想气候是凉爽和阳光充足的气候。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Analisis Pengaruh Suhu Panel Surya Terhadap Output Panel Performance

The main obstacle that greatly affects solar power output systems is the low conversion efficiency of solar panels, which is greatly influenced by their operating temperature. Failure to consider solar panel temperature increases the financial risks of installing the installation system. In this research, the output performance of solar panels was examined in outdoor conditions. All data was measured and recorded from 09.00 to 17.00, over 30 minute intervals. Panel temperature measurements were carried out using a Ditec C355 infrared thermometer. And then compared with using Pvsyst software. The output power of a solar panel is highly dependent on the solar radiation that falls on its surface. The amount of incoming sunlight is much higher during the hours from 11.00 to 13.00, which can be determined as the peak of the sun during the day. So it can be concluded that the ideal climate for setting up a large solar installation system is a cool and sunny climate.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Journal of Mechanical Engineering Engineering-Mechanical Engineering

CiteScore

1.00

自引率

0.00%

发文量

审稿时长

16 weeks

期刊介绍： Journal of Mechanical Engineering (formerly known as Journal of Faculty of Mechanical Engineering) or JMechE, is an international journal which provides a forum for researchers and academicians worldwide to publish the research findings and the educational methods they are engaged in. This Journal acts as a link for the mechanical engineering community for rapid dissemination of their academic pursuits. The journal is published twice a year, in June and December, which discusses the progress of Mechanical Engineering advancement.