Sheet Forming of Roll Cast Aluminum Alloy for Die Casting

This study explored the capability of sheet forming of JIS ADC12 aluminum alloy, commonly used for die casting. Despite the poor ductility of ADC12, we attempted to improve this property by applying rapid solidification through an unequal diameter twin roll caster. A strip with a thickness of 3.7 mm was cast at a speed of 20 m/min. The as-cast strip was then cold rolled and annealed to investigate its sheet-formability by deep drawing, three-roll bending and V-bending. This research also investigated the elements of ADC12 that contribute to poor ductility, with a focus on the impact of Mg, Cu, Fe, and Zn during the deep drawing process.