Caner Bulut , Fatih Yıldız , Temel Varol , Tevfik Oğuzhan Ergüder
{"title":"钛对选择性激光熔化法制造的 CoCrFeMnNiTix 高熵合金的结构、机械和表面性能的影响","authors":"Caner Bulut , Fatih Yıldız , Temel Varol , Tevfik Oğuzhan Ergüder","doi":"10.1016/j.intermet.2024.108281","DOIUrl":null,"url":null,"abstract":"<div><p>In this study, the effect of titanium (Ti) on the microstructure, mechanical properties, wear resistance and corrosion behavior of CoCrFeMnNi high-entropy alloy (HEA) was examined. The selective laser melting (SLM) method was used to produce HEAs without Ti addition (HEA-1) and with Ti additions of 3 and 5 wt% (HEA-2 and HEA-3, respectively). While the HEA-1 sample exhibited a single-phase face-centered cubic (FCC) structure, the HEA-2 and HEA-3 samples exhibited intermetallic phase structures (Sigma and Laves) along with FCC. The addition of Ti and the presence of intermetallic phases in the HEA-2 sample revealed an improvement in mechanical properties without reducing the ductility value of the structure. However, in parallel with the increasing Ti ratio, the formation of more brittle intermetallic phases in the microstructure of the HEA-3 alloy caused a significant increase in strength but a decrease in ductility. Microstructural examinations revealed that all alloys had a cellular/dendritic structure and the relative densities of the samples were above 99%. While the ultimate tensile stress (UTS) of the HEA-1 sample was 548 MPa and the UTS of the HEA-3 alloy was 832.1 MPa, elongation values were obtained as 48% and 2%, respectively. HEA-2 sample exhibited more ideal results with an elongation value of approximately 22% and UTS values of 760.8 MPa. It was observed that the addition of Ti significantly increased the wear resistance in sliding conditions due to the increase in the hardness of the alloy. The highest hardness and lowest wear rate were obtained with HEA-3 coded samples. The HEA-1 sample exhibited the best corrosion rate, with higher corrosion potential (E<sub>corr</sub>) and lower corrosion current density (I<sub>corr</sub>) values. The highest corrosion rate was observed in the HEA-3 sample.</p></div>","PeriodicalId":331,"journal":{"name":"Intermetallics","volume":null,"pages":null},"PeriodicalIF":4.3000,"publicationDate":"2024-04-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of titanium on the structural, mechanical and surface properties of CoCrFeMnNiTix high entropy alloy fabricated by selective laser melting\",\"authors\":\"Caner Bulut , Fatih Yıldız , Temel Varol , Tevfik Oğuzhan Ergüder\",\"doi\":\"10.1016/j.intermet.2024.108281\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>In this study, the effect of titanium (Ti) on the microstructure, mechanical properties, wear resistance and corrosion behavior of CoCrFeMnNi high-entropy alloy (HEA) was examined. The selective laser melting (SLM) method was used to produce HEAs without Ti addition (HEA-1) and with Ti additions of 3 and 5 wt% (HEA-2 and HEA-3, respectively). While the HEA-1 sample exhibited a single-phase face-centered cubic (FCC) structure, the HEA-2 and HEA-3 samples exhibited intermetallic phase structures (Sigma and Laves) along with FCC. The addition of Ti and the presence of intermetallic phases in the HEA-2 sample revealed an improvement in mechanical properties without reducing the ductility value of the structure. However, in parallel with the increasing Ti ratio, the formation of more brittle intermetallic phases in the microstructure of the HEA-3 alloy caused a significant increase in strength but a decrease in ductility. Microstructural examinations revealed that all alloys had a cellular/dendritic structure and the relative densities of the samples were above 99%. While the ultimate tensile stress (UTS) of the HEA-1 sample was 548 MPa and the UTS of the HEA-3 alloy was 832.1 MPa, elongation values were obtained as 48% and 2%, respectively. HEA-2 sample exhibited more ideal results with an elongation value of approximately 22% and UTS values of 760.8 MPa. It was observed that the addition of Ti significantly increased the wear resistance in sliding conditions due to the increase in the hardness of the alloy. The highest hardness and lowest wear rate were obtained with HEA-3 coded samples. The HEA-1 sample exhibited the best corrosion rate, with higher corrosion potential (E<sub>corr</sub>) and lower corrosion current density (I<sub>corr</sub>) values. The highest corrosion rate was observed in the HEA-3 sample.</p></div>\",\"PeriodicalId\":331,\"journal\":{\"name\":\"Intermetallics\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.3000,\"publicationDate\":\"2024-04-02\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Intermetallics\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0966979524001006\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"CHEMISTRY, PHYSICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Intermetallics","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0966979524001006","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
Effect of titanium on the structural, mechanical and surface properties of CoCrFeMnNiTix high entropy alloy fabricated by selective laser melting
In this study, the effect of titanium (Ti) on the microstructure, mechanical properties, wear resistance and corrosion behavior of CoCrFeMnNi high-entropy alloy (HEA) was examined. The selective laser melting (SLM) method was used to produce HEAs without Ti addition (HEA-1) and with Ti additions of 3 and 5 wt% (HEA-2 and HEA-3, respectively). While the HEA-1 sample exhibited a single-phase face-centered cubic (FCC) structure, the HEA-2 and HEA-3 samples exhibited intermetallic phase structures (Sigma and Laves) along with FCC. The addition of Ti and the presence of intermetallic phases in the HEA-2 sample revealed an improvement in mechanical properties without reducing the ductility value of the structure. However, in parallel with the increasing Ti ratio, the formation of more brittle intermetallic phases in the microstructure of the HEA-3 alloy caused a significant increase in strength but a decrease in ductility. Microstructural examinations revealed that all alloys had a cellular/dendritic structure and the relative densities of the samples were above 99%. While the ultimate tensile stress (UTS) of the HEA-1 sample was 548 MPa and the UTS of the HEA-3 alloy was 832.1 MPa, elongation values were obtained as 48% and 2%, respectively. HEA-2 sample exhibited more ideal results with an elongation value of approximately 22% and UTS values of 760.8 MPa. It was observed that the addition of Ti significantly increased the wear resistance in sliding conditions due to the increase in the hardness of the alloy. The highest hardness and lowest wear rate were obtained with HEA-3 coded samples. The HEA-1 sample exhibited the best corrosion rate, with higher corrosion potential (Ecorr) and lower corrosion current density (Icorr) values. The highest corrosion rate was observed in the HEA-3 sample.
期刊介绍:
This journal is a platform for publishing innovative research and overviews for advancing our understanding of the structure, property, and functionality of complex metallic alloys, including intermetallics, metallic glasses, and high entropy alloys.
The journal reports the science and engineering of metallic materials in the following aspects:
Theories and experiments which address the relationship between property and structure in all length scales.
Physical modeling and numerical simulations which provide a comprehensive understanding of experimental observations.
Stimulated methodologies to characterize the structure and chemistry of materials that correlate the properties.
Technological applications resulting from the understanding of property-structure relationship in materials.
Novel and cutting-edge results warranting rapid communication.
The journal also publishes special issues on selected topics and overviews by invitation only.