用苯稀释剂中的 DEHPA 溶剂萃取废锌-C 电池氯化物浸出液中的锰和锌

IF 2.5 3区 材料科学 Q3 GREEN & SUSTAINABLE SCIENCE & TECHNOLOGY
Mohamed Taha Osman Abdelraheem, Ali Aras, Hasan Ali Taner, Tevfik Agacayak
{"title":"用苯稀释剂中的 DEHPA 溶剂萃取废锌-C 电池氯化物浸出液中的锰和锌","authors":"Mohamed Taha Osman Abdelraheem, Ali Aras, Hasan Ali Taner, Tevfik Agacayak","doi":"10.1007/s40831-024-00810-9","DOIUrl":null,"url":null,"abstract":"<p>The applicability of utilizing solvent extraction processes of manganese (Mn) and zinc (Zn) from chloride leachate of spent zinc–carbon (Zn–C) batteries has been studied by using di-2-ethylhexyl phosphoric acid (DEHPA) as an extractant agent. The effect of five factors (equilibrium pH, O/A ratio, temperature, extractant concentration, and diluent type) were investigated. According to the results gained, the appropriate solution pH level for DEHPA was found to be 6.5. With DEHPA (20%, v/v), 77.50% Mn and 100% Zn were extracted, within 15 min contact time at a 1:1 aqueous/organic ratio and 50 °C temperature. Also, a McCabe–Thiele diagram was drawn and one single-step extraction for Zn and a two-stage process for Mn were needed to achieve the highest extraction efficiency. ΔH as a thermodynamic parameter was calculated and found to be 18.39 kJ/mol for Mn and − 245.50 kJ/mol for Zn, respectively, indicating that the extraction process was endothermic for Mn and exothermic for Zn. A desirable stripping of Mn and Zn from the loaded organic phase could be obtained using a stripping solution of 6 M HCl.</p><h3 data-test=\"abstract-sub-heading\">Graphical Abstract</h3>\n","PeriodicalId":17160,"journal":{"name":"Journal of Sustainable Metallurgy","volume":"35 1","pages":""},"PeriodicalIF":2.5000,"publicationDate":"2024-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Solvent Extraction of Manganese and Zinc from Chloride Leach Solution of Spent Zn–C Batteries with DEHPA in Benzene Diluent\",\"authors\":\"Mohamed Taha Osman Abdelraheem, Ali Aras, Hasan Ali Taner, Tevfik Agacayak\",\"doi\":\"10.1007/s40831-024-00810-9\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>The applicability of utilizing solvent extraction processes of manganese (Mn) and zinc (Zn) from chloride leachate of spent zinc–carbon (Zn–C) batteries has been studied by using di-2-ethylhexyl phosphoric acid (DEHPA) as an extractant agent. The effect of five factors (equilibrium pH, O/A ratio, temperature, extractant concentration, and diluent type) were investigated. According to the results gained, the appropriate solution pH level for DEHPA was found to be 6.5. With DEHPA (20%, v/v), 77.50% Mn and 100% Zn were extracted, within 15 min contact time at a 1:1 aqueous/organic ratio and 50 °C temperature. Also, a McCabe–Thiele diagram was drawn and one single-step extraction for Zn and a two-stage process for Mn were needed to achieve the highest extraction efficiency. ΔH as a thermodynamic parameter was calculated and found to be 18.39 kJ/mol for Mn and − 245.50 kJ/mol for Zn, respectively, indicating that the extraction process was endothermic for Mn and exothermic for Zn. A desirable stripping of Mn and Zn from the loaded organic phase could be obtained using a stripping solution of 6 M HCl.</p><h3 data-test=\\\"abstract-sub-heading\\\">Graphical Abstract</h3>\\n\",\"PeriodicalId\":17160,\"journal\":{\"name\":\"Journal of Sustainable Metallurgy\",\"volume\":\"35 1\",\"pages\":\"\"},\"PeriodicalIF\":2.5000,\"publicationDate\":\"2024-03-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Sustainable Metallurgy\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1007/s40831-024-00810-9\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"GREEN & SUSTAINABLE SCIENCE & TECHNOLOGY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Sustainable Metallurgy","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s40831-024-00810-9","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"GREEN & SUSTAINABLE SCIENCE & TECHNOLOGY","Score":null,"Total":0}
引用次数: 0

摘要

以二-2-乙基己基磷酸(DEHPA)为萃取剂,研究了利用溶剂萃取工艺从废锌-碳(Zn-C)电池的氯化物浸出液中提取锰(Mn)和锌(Zn)的适用性。研究了五个因素(平衡 pH 值、O/A 比、温度、萃取剂浓度和稀释剂类型)的影响。结果表明,DEHPA 适合的溶液 pH 值为 6.5。在水/有机物比例为 1:1 和温度为 50 °C 的条件下,使用 DEHPA(20%,v/v),在 15 分钟的接触时间内,萃取了 77.50% 的锰和 100% 的锌。此外,还绘制了 McCabe-Thiele 图,要达到最高的萃取效率,需要对锌进行单步萃取,对锰进行两步萃取。热力学参数 ΔH 经过计算后发现,锰的热力学参数为 18.39 kJ/mol,而锌的热力学参数为 - 245.50 kJ/mol,这表明锰的萃取过程是内热的,而锌的萃取过程是放热的。使用 6 M HCl 的汽提溶液可以从负载有机相中获得理想的锰和锌汽提效果。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

Solvent Extraction of Manganese and Zinc from Chloride Leach Solution of Spent Zn–C Batteries with DEHPA in Benzene Diluent

Solvent Extraction of Manganese and Zinc from Chloride Leach Solution of Spent Zn–C Batteries with DEHPA in Benzene Diluent

The applicability of utilizing solvent extraction processes of manganese (Mn) and zinc (Zn) from chloride leachate of spent zinc–carbon (Zn–C) batteries has been studied by using di-2-ethylhexyl phosphoric acid (DEHPA) as an extractant agent. The effect of five factors (equilibrium pH, O/A ratio, temperature, extractant concentration, and diluent type) were investigated. According to the results gained, the appropriate solution pH level for DEHPA was found to be 6.5. With DEHPA (20%, v/v), 77.50% Mn and 100% Zn were extracted, within 15 min contact time at a 1:1 aqueous/organic ratio and 50 °C temperature. Also, a McCabe–Thiele diagram was drawn and one single-step extraction for Zn and a two-stage process for Mn were needed to achieve the highest extraction efficiency. ΔH as a thermodynamic parameter was calculated and found to be 18.39 kJ/mol for Mn and − 245.50 kJ/mol for Zn, respectively, indicating that the extraction process was endothermic for Mn and exothermic for Zn. A desirable stripping of Mn and Zn from the loaded organic phase could be obtained using a stripping solution of 6 M HCl.

Graphical Abstract

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Journal of Sustainable Metallurgy
Journal of Sustainable Metallurgy Materials Science-Metals and Alloys
CiteScore
4.00
自引率
12.50%
发文量
151
期刊介绍: Journal of Sustainable Metallurgy is dedicated to presenting metallurgical processes and related research aimed at improving the sustainability of metal-producing industries, with a particular emphasis on materials recovery, reuse, and recycling. Its editorial scope encompasses new techniques, as well as optimization of existing processes, including utilization, treatment, and management of metallurgically generated residues. Articles on non-technical barriers and drivers that can affect sustainability will also be considered.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信