EXPERIMENTAL STUDY ON THE STRUCTURAL BEHAVIOR OF RECYCLED PLASTIC ONE STORY HOUSES

Recycling plastic materials may constitute a relief measure to the global plastic problem. Several companies are now producing recycled plastic for use as construction material in single-story houses. One commercially available layout involves assembling Recycled Plastic Lumber units in a running bond pattern, forming panels confined by horizontal and vertical tie elements joined through bolted steel plate connections. As production of houses is industrialized, the architectural layouts are standardized according to specific distribution and dimensions. This paper presents the findings of an experimental program aimed to characterize the seismic behavior and properties of a one-story house model. To facilitate practical application, the model is referred here as Architectural Standard Model (ASM). The objectives of the test campaign were to investigate the structural behavior of the constituting members and assemblies, and the response of structural walls to cyclic static lateral loads. Three natural scale wall specimens were tested in-plane and two out of plane. Results of natural scale cyclic loading tests demonstrated that structural system of the ASM can perform acceptably safely under high seismic loads if it is adequately fixed to the foundation. The results showed that out of plane loading was the critical pattern and behaved like a unidirectional plate that transmitted load to the columns. In plane observed behavior exhibited predominating rocking component, which suggests considering an evaluation of the system's response using dynamic methods.