The Use of 3D Printed Sand Molds and Cores in the Castings Production

As a part of this work, an analysis of the current state of knowledge regarding the use of additive technology - binder jetting in the production of castings was made. The binder jetting (so-called 3D printing) has become the leading method of sand mold and core production. Within this paper types of molding and core sands with organic and inorganic binders that are and can be used in technology were analyzed. The need to carry out works aimed at developing pro-ecological molding / core sands with inorganic binders and organic binders with reduced harmfulness to the environment dedicated to binder jetting technology was noticed. The influence of technology parameters on the properties of molding / core sands and the properties of cast components was analyzed. It was shown that thanks to the unlimited shapes of the systems obtained with the use of additive technologies, it is possible to influence the rate of heat dissipation through the mold, which positively effects the process of solidification and crystallization of the castings.