材料特性和工艺参数对燃料电池扩散介质激光结构烧蚀行为的影响

IF 1.7 4区 工程技术 Q3 MATERIALS SCIENCE, MULTIDISCIPLINARY
Christian Geiger, Sophie Grabmann, T. Weiss, Alena Gruendl, M. F. Zaeh
{"title":"材料特性和工艺参数对燃料电池扩散介质激光结构烧蚀行为的影响","authors":"Christian Geiger, Sophie Grabmann, T. Weiss, Alena Gruendl, M. F. Zaeh","doi":"10.2351/7.0001284","DOIUrl":null,"url":null,"abstract":"Hydrogen-powered polymer electrolyte membrane fuel cells (PEMFCs) show promising potential to power a wide range of mobile and stationary applications and to reduce greenhouse gas emissions significantly. In PEMFCs, the oxygen transport and the water transport are essential for a long lifetime and high-performance characteristics. The diffusion media (DM), located between the bipolar plate and the catalyst-coated membrane, is a crucial component of the fuel cell that significantly affects the cell-internal processes. Usually, the DM is a two-layer material system consisting of a microporous layer based on carbon black particles coated onto a porous gas diffusion layer (e.g., carbon paper). The properties of the microporous layer regarding the water transport at high current densities and, consequently, the fuel cell’s performance and lifetime can be improved by laser structuring. Within this work, different microporous layers with varying binder content and porosities were structured by locally ablating the material using ultrashort-pulsed laser radiation in the infrared wavelength range. The effect of varying process parameters was additionally investigated. Furthermore, the ablation efficiencies were calculated for increasing pulse repetition rates to qualify a process window for an industrial structuring process. The size of the micro-drillings and the heat-affected zone surrounding the hole were evaluated through topographic and microstructure analyses using a laser scanning microscope and a scanning electron microscope with energy-dispersive x-ray spectroscopy. The results showed a rather small influence of the porosity and composition of the microporous layer on the ablation behavior. In contrast, the laser structuring parameters influenced the micro-drilling geometry significantly.","PeriodicalId":50168,"journal":{"name":"Journal of Laser Applications","volume":null,"pages":null},"PeriodicalIF":1.7000,"publicationDate":"2024-03-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Influence of the material properties and the process parameters on the ablation behavior for the laser structuring of the diffusion media for fuel cells\",\"authors\":\"Christian Geiger, Sophie Grabmann, T. Weiss, Alena Gruendl, M. F. Zaeh\",\"doi\":\"10.2351/7.0001284\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Hydrogen-powered polymer electrolyte membrane fuel cells (PEMFCs) show promising potential to power a wide range of mobile and stationary applications and to reduce greenhouse gas emissions significantly. In PEMFCs, the oxygen transport and the water transport are essential for a long lifetime and high-performance characteristics. The diffusion media (DM), located between the bipolar plate and the catalyst-coated membrane, is a crucial component of the fuel cell that significantly affects the cell-internal processes. Usually, the DM is a two-layer material system consisting of a microporous layer based on carbon black particles coated onto a porous gas diffusion layer (e.g., carbon paper). The properties of the microporous layer regarding the water transport at high current densities and, consequently, the fuel cell’s performance and lifetime can be improved by laser structuring. Within this work, different microporous layers with varying binder content and porosities were structured by locally ablating the material using ultrashort-pulsed laser radiation in the infrared wavelength range. The effect of varying process parameters was additionally investigated. Furthermore, the ablation efficiencies were calculated for increasing pulse repetition rates to qualify a process window for an industrial structuring process. The size of the micro-drillings and the heat-affected zone surrounding the hole were evaluated through topographic and microstructure analyses using a laser scanning microscope and a scanning electron microscope with energy-dispersive x-ray spectroscopy. The results showed a rather small influence of the porosity and composition of the microporous layer on the ablation behavior. In contrast, the laser structuring parameters influenced the micro-drilling geometry significantly.\",\"PeriodicalId\":50168,\"journal\":{\"name\":\"Journal of Laser Applications\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.7000,\"publicationDate\":\"2024-03-05\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Laser Applications\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.2351/7.0001284\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Laser Applications","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.2351/7.0001284","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

氢动力聚合物电解质膜燃料电池(PEMFCs)在为各种移动和固定应用提供动力以及大幅减少温室气体排放方面显示出巨大的潜力。在 PEMFC 中,氧传输和水传输对于长寿命和高性能特性至关重要。扩散介质(DM)位于双极板和催化剂涂层膜之间,是燃料电池的重要组成部分,对电池内部过程有重大影响。通常,DM 是一种双层材料系统,由涂覆在多孔气体扩散层(如碳纸)上的基于炭黑颗粒的微孔层组成。微孔层在高电流密度下的水传输特性,以及由此产生的燃料电池性能和寿命,可以通过激光构造得到改善。在这项工作中,通过使用红外波长范围内的超短脉冲激光辐射对材料进行局部烧蚀,形成了不同粘合剂含量和孔隙率的微孔层。此外,还研究了不同工艺参数的影响。此外,还计算了脉冲重复率增加时的烧蚀效率,以确定工业结构化工艺的工艺窗口。通过使用激光扫描显微镜和扫描电子显微镜以及能量色散 X 射线光谱仪进行形貌和微结构分析,对微钻孔的尺寸和孔周围的热影响区进行了评估。结果表明,微孔层的孔隙率和成分对烧蚀行为的影响很小。相比之下,激光结构参数对微钻孔几何形状的影响很大。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Influence of the material properties and the process parameters on the ablation behavior for the laser structuring of the diffusion media for fuel cells
Hydrogen-powered polymer electrolyte membrane fuel cells (PEMFCs) show promising potential to power a wide range of mobile and stationary applications and to reduce greenhouse gas emissions significantly. In PEMFCs, the oxygen transport and the water transport are essential for a long lifetime and high-performance characteristics. The diffusion media (DM), located between the bipolar plate and the catalyst-coated membrane, is a crucial component of the fuel cell that significantly affects the cell-internal processes. Usually, the DM is a two-layer material system consisting of a microporous layer based on carbon black particles coated onto a porous gas diffusion layer (e.g., carbon paper). The properties of the microporous layer regarding the water transport at high current densities and, consequently, the fuel cell’s performance and lifetime can be improved by laser structuring. Within this work, different microporous layers with varying binder content and porosities were structured by locally ablating the material using ultrashort-pulsed laser radiation in the infrared wavelength range. The effect of varying process parameters was additionally investigated. Furthermore, the ablation efficiencies were calculated for increasing pulse repetition rates to qualify a process window for an industrial structuring process. The size of the micro-drillings and the heat-affected zone surrounding the hole were evaluated through topographic and microstructure analyses using a laser scanning microscope and a scanning electron microscope with energy-dispersive x-ray spectroscopy. The results showed a rather small influence of the porosity and composition of the microporous layer on the ablation behavior. In contrast, the laser structuring parameters influenced the micro-drilling geometry significantly.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
3.60
自引率
9.50%
发文量
125
审稿时长
>12 weeks
期刊介绍: The Journal of Laser Applications (JLA) is the scientific platform of the Laser Institute of America (LIA) and is published in cooperation with AIP Publishing. The high-quality articles cover a broad range from fundamental and applied research and development to industrial applications. Therefore, JLA is a reflection of the state-of-R&D in photonic production, sensing and measurement as well as Laser safety. The following international and well known first-class scientists serve as allocated Editors in 9 new categories: High Precision Materials Processing with Ultrafast Lasers Laser Additive Manufacturing High Power Materials Processing with High Brightness Lasers Emerging Applications of Laser Technologies in High-performance/Multi-function Materials and Structures Surface Modification Lasers in Nanomanufacturing / Nanophotonics & Thin Film Technology Spectroscopy / Imaging / Diagnostics / Measurements Laser Systems and Markets Medical Applications & Safety Thermal Transportation Nanomaterials and Nanoprocessing Laser applications in Microelectronics.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信