Rapid dissolution without elemental fractionation by laser driven hydrothermal processing

Traditional dissolution of geologic samples often requires a significant time investment. Here, we present an alternative method for the dissolution of geologic materials using laser-driven hydrothermal processing (LDHP). LDHP uses laser energy directed onto a submerged sample, which increases the temperature and pressure at the liquid–sample interface and drives the hydrothermal dissolution coupled with photomechanical spallation, an ablative process. This uses focused 527 nm laser energy at 40 W average power, 1 kHz pulse repetition rate, and 115 ns pulse duration. When LDHP is performed on basalt geostandards (BCR-2 and BHVO-2) using the conditions outlined, we show that LDHP does not produce significant elemental fractionation and, thus, can be considered an alternative processing method to traditional mechanical crushing and acid digestion. Additionally, it is possible using LDHP to utilize the spatially confined beam to target and selectively isolate individual phases in a rock, potentially alleviating the need for mechanical separation of inclusions that are difficult to physically isolate. Furthermore, using this outlined method of LDHP, we demonstrate full dissolution of 120 mg of obsidian in 85 minu, meaning that LDHP is a potentially very useful method when sample processing is time sensitive.