Measurement and control of foam generation in a mammalian cell culture

Foam is generated in mammalian cell cultures by excessive agitation or gas sparging. This occurs particularly in cultures that generate recombinant proteins at high cell concentrations. Three antifoam agents were tested for their compatibility with antibody-producing Chinese hamster ovary (CHO) cells. One agent (antifoam 204) was completely inhibitory to growth at a concentration of 10 ppm, one agent (antifoam C) showed partial inhibition and a third (antifoam SE-15) showed no inhibition at this concentration. A novel foam image analyzer (LabCam) was used to evaluate two antifoams (C and SE-15) for their ability to dissipate foam generated in cell culture media by enhanced agitation. The presence of antifoam in the media reduced significantly the foam layer that was generated and this was shown to be rapidly dissipated in the presence of 10 ppm SE-15. The antifoams were also tested for foam dissipation in cultures of CHO cells at >10⁶ cells/mL. Supplementation of the cultures with SE-15 resulted in dissipation of foam generated by excessive gas sparging within 2 min. Under equivalent conditions 75% of foam dissipated in the presence of antifoam C, within 2 min but there was a residual foam layer up to 25 min. This study showed the value of an optical monitoring system (LabCam) for measuring foam generation and dissipation in a bioreactor to assess the efficiency of antifoam agents to reduce foam in a bioreactor. This has the potential for use as a control system that could be designed for continuous monitoring and foam control in a mammalian cell bioprocess.