Toward Enhanced Machine-Based Release in X-ray Sterilization.

Trends toward the use of irradiator parameter release (also called machine-based release) put pressure on equipment manufacturers to guarantee accuracy and reliability of monitored process parameters. In the specific case of X-ray processing, relevance of these monitored parameters is questionable due to the additional difficulty coming from the fact that the X-ray converter does not have associated parameters or a monitored feedback mechanism. To bridge this gap, this article presents a novel method to verify in real-time consistency of certain X-ray field properties. It covers the description of an X-ray flux monitor and its experimental characterization. The proposed detector can be used as a control and monitoring tool in addition to the conventional "passive" dosimetry per ISO 11137-1 and ISO 11137-3. It can detect photon flux deviation on the order of magnitude of 1%. Its performance would allow real-time monitoring of each pallet being processed and ensure that the correct X-ray beam is directed to the product. Further, the known response of the detector to a product can serve as a validation that the correct product is in front of the beam. Moreover, a detector of this type could contribute to moving from the current dosimetric release to irradiator parameter release. Compared with current practices, benefits would include an increased number of control points used to verify process conformity, real-time information on the radiation field (process output validation), limited manual handling of dosimeters, and verification that the product treated is the same as the performance qualification dose-mapped product.