Sensitivity Analysis of Performance Tests for 6-DOF Serial Industrial Robots

The international standard ISO 9283:1998 is popular for performance tests of industrial robots at present. It is desirable that the tests described in this standard should be sensitive to error sources of robot end positioning/orientation. In this paper, firstly, the kinematic and the joint stiffness model parameters are identified experimentally for two models of 6-DOF (Degree of Freedom) serial in-dustrial robots (i.e., the ABB IRB 1410 and UR5 robots). Then, the standard deviations of the de-rived model parameters are obtained as error inputs for the sensitivity analysis of the performance tests including the positioning/orientation accuracy/repeatability tests. By simulating the error sen-sitivity of the positioning/orientation accuracy/repeatability test methods for industrial robots, it is analyzed whether the tests described in the ISO 9283:1998 Standard are sensitive to the focused er-ror sources, showing the limitations of the evaluation index of the ISO 9283:1998 Standard.. The results show that for 6-DOF serial industrial robots, the positioning accuracy test is the key to de-termining their motion performance. The orientation accuracy and repeatability tests are not neces-sary if the positioning accuracy and repeatability tests can be done for 6-DOF serial industrial robots. Finally, the improvement suggestion of the performance test method is proposed. The research of this paper is beneficial for improving the performance evaluation methods of industrial robots. It can also help robot manufacturing enterprises analyze and improve the positioning/orientation accura-cy/repeatability of their products.