{"title":"超细 Al/B、Ti/B 和 Fe/B 粉末对高能材料点火和燃烧特性的影响","authors":"I. V. Sorokin, A. G. Korotkikh","doi":"10.1134/s0010508223060072","DOIUrl":null,"url":null,"abstract":"<h3 data-test=\"abstract-sub-heading\">Abstract</h3><p>This paper describes a study of the ignition and combustion characteristics of a high-energy material containing ammonium perchlorate, butadiene rubber, and an ultrafine powder mixture of aluminum, titanium, or iron with amorphous boron. An experimental stand based on a CO<sub>2</sub> laser and a constant-pressure bomb is used to measure the ignition delay time and burning rate of the high-energy material while varying the heat flux density and the chamber pressure. It is shown that replacing amorphous boron with ultrafine Al/B, Ti/B, or Fe/B in a high-energy material reduces the heating time and the moment at which a flame appears on the propellant surface due to an increase in the reaction rate and a decrease in the oxidation temperature of these mixtures on the surface of the reaction layer. In this case, the burning rate of the high-energy materials with Me/B at excess pressures increases significantly (up to 240% for Al/B-HEM and up to 120% for Ti/B-HEM at a pressure of 5.0 MPa).</p>","PeriodicalId":10509,"journal":{"name":"Combustion, Explosion, and Shock Waves","volume":"28 1","pages":""},"PeriodicalIF":0.9000,"publicationDate":"2024-01-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of Ultrafine Al/B, Ti/B, and Fe/B Powders on the Ignition and Combustion Characteristics of High-Energy Materials\",\"authors\":\"I. V. Sorokin, A. G. Korotkikh\",\"doi\":\"10.1134/s0010508223060072\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<h3 data-test=\\\"abstract-sub-heading\\\">Abstract</h3><p>This paper describes a study of the ignition and combustion characteristics of a high-energy material containing ammonium perchlorate, butadiene rubber, and an ultrafine powder mixture of aluminum, titanium, or iron with amorphous boron. An experimental stand based on a CO<sub>2</sub> laser and a constant-pressure bomb is used to measure the ignition delay time and burning rate of the high-energy material while varying the heat flux density and the chamber pressure. It is shown that replacing amorphous boron with ultrafine Al/B, Ti/B, or Fe/B in a high-energy material reduces the heating time and the moment at which a flame appears on the propellant surface due to an increase in the reaction rate and a decrease in the oxidation temperature of these mixtures on the surface of the reaction layer. In this case, the burning rate of the high-energy materials with Me/B at excess pressures increases significantly (up to 240% for Al/B-HEM and up to 120% for Ti/B-HEM at a pressure of 5.0 MPa).</p>\",\"PeriodicalId\":10509,\"journal\":{\"name\":\"Combustion, Explosion, and Shock Waves\",\"volume\":\"28 1\",\"pages\":\"\"},\"PeriodicalIF\":0.9000,\"publicationDate\":\"2024-01-22\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Combustion, Explosion, and Shock Waves\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1134/s0010508223060072\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENERGY & FUELS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Combustion, Explosion, and Shock Waves","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1134/s0010508223060072","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
Effect of Ultrafine Al/B, Ti/B, and Fe/B Powders on the Ignition and Combustion Characteristics of High-Energy Materials
Abstract
This paper describes a study of the ignition and combustion characteristics of a high-energy material containing ammonium perchlorate, butadiene rubber, and an ultrafine powder mixture of aluminum, titanium, or iron with amorphous boron. An experimental stand based on a CO2 laser and a constant-pressure bomb is used to measure the ignition delay time and burning rate of the high-energy material while varying the heat flux density and the chamber pressure. It is shown that replacing amorphous boron with ultrafine Al/B, Ti/B, or Fe/B in a high-energy material reduces the heating time and the moment at which a flame appears on the propellant surface due to an increase in the reaction rate and a decrease in the oxidation temperature of these mixtures on the surface of the reaction layer. In this case, the burning rate of the high-energy materials with Me/B at excess pressures increases significantly (up to 240% for Al/B-HEM and up to 120% for Ti/B-HEM at a pressure of 5.0 MPa).
期刊介绍：
Combustion, Explosion, and Shock Waves a peer reviewed journal published in collaboration with the Siberian Branch of the Russian Academy of Sciences. The journal presents top-level studies in the physics and chemistry of combustion and detonation processes, structural and chemical transformation of matter in shock and detonation waves, and related phenomena. Each issue contains valuable information on initiation of detonation in condensed and gaseous phases, environmental consequences of combustion and explosion, engine and power unit combustion, production of new materials by shock and detonation waves, explosion welding, explosive compaction of powders, dynamic responses of materials and constructions, and hypervelocity impact.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
