平面波瓦流中可变形颗粒悬浮液的有序-无序转变

Paul C. Millett
{"title":"平面波瓦流中可变形颗粒悬浮液的有序-无序转变","authors":"Paul C. Millett","doi":"10.1017/jfm.2023.1052","DOIUrl":null,"url":null,"abstract":"Abstract Three-dimensional simulations of the ordering of elastic capsule suspensions within planar Poiseuille flow channels are reported. The simulations utilize the immersed boundary method coupled with the lattice Boltzmann method to capture the complex flow-induced capsule deformations and hydrodynamic interactions within the suspensions. A parametric study is presented whereby the confinement ratio and the particle deformability are varied independently within a two-dimensional range relevant to this ordering phenomenon. The initial distribution of capsules is random, and the simulations evolve the system from a disordered state to an ordered one, while an order parameter that quantifies the fraction of capsules belonging to one-dimensional train assemblies is computed throughout time. A monotonic increase in ordering is observed with increasing deformability. However, an optimal confinement ratio is identified corresponding to a peak in the order parameter. This peak is attributed to the competition between increasing long-range capsule attractions and decreasing in-plane capsule density (with fixed volume fraction) as the confinement ratio increases. Simulations are also performed to understand how dispersity in capsule size and deformability impact the degree of ordering. It is shown that ordering is quite sensitive to dispersity in capsule size, and much less sensitive to dispersity in deformability. Overall, the results provide important insights for the design of microfluidic devices.","PeriodicalId":505053,"journal":{"name":"Journal of Fluid Mechanics","volume":"7 9","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2024-01-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Order–disorder transitions within deformable particle suspensions in planar Poiseuille flow\",\"authors\":\"Paul C. Millett\",\"doi\":\"10.1017/jfm.2023.1052\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Abstract Three-dimensional simulations of the ordering of elastic capsule suspensions within planar Poiseuille flow channels are reported. The simulations utilize the immersed boundary method coupled with the lattice Boltzmann method to capture the complex flow-induced capsule deformations and hydrodynamic interactions within the suspensions. A parametric study is presented whereby the confinement ratio and the particle deformability are varied independently within a two-dimensional range relevant to this ordering phenomenon. The initial distribution of capsules is random, and the simulations evolve the system from a disordered state to an ordered one, while an order parameter that quantifies the fraction of capsules belonging to one-dimensional train assemblies is computed throughout time. A monotonic increase in ordering is observed with increasing deformability. However, an optimal confinement ratio is identified corresponding to a peak in the order parameter. This peak is attributed to the competition between increasing long-range capsule attractions and decreasing in-plane capsule density (with fixed volume fraction) as the confinement ratio increases. Simulations are also performed to understand how dispersity in capsule size and deformability impact the degree of ordering. It is shown that ordering is quite sensitive to dispersity in capsule size, and much less sensitive to dispersity in deformability. Overall, the results provide important insights for the design of microfluidic devices.\",\"PeriodicalId\":505053,\"journal\":{\"name\":\"Journal of Fluid Mechanics\",\"volume\":\"7 9\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-01-12\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Fluid Mechanics\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1017/jfm.2023.1052\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Fluid Mechanics","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1017/jfm.2023.1052","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

摘要 报告了弹性胶囊悬浮液在平面波瓦流道内排序的三维模拟。模拟利用沉浸边界法和晶格玻尔兹曼法来捕捉悬浮液中由流动引起的复杂胶囊变形和流体动力学相互作用。通过参数研究,可以在与这种有序现象相关的二维范围内独立改变约束比和颗粒变形能力。胶囊的初始分布是随机的,模拟将系统从无序状态演化为有序状态,同时在整个过程中计算量化属于一维列车组件的胶囊比例的有序参数。随着变形能力的增加,有序性也会单调增加。然而,与阶次参数峰值相对应的是一个最佳约束比。这个峰值是由于随着约束比的增加,长程胶囊吸引力的增加和平面内胶囊密度(固定体积分数)的减小之间的竞争造成的。我们还进行了模拟,以了解胶囊尺寸的分散性和可变形性如何影响有序程度。结果表明,有序性对胶囊尺寸的分散性相当敏感,而对变形性的分散性的敏感性要低得多。总之,研究结果为微流控设备的设计提供了重要启示。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Order–disorder transitions within deformable particle suspensions in planar Poiseuille flow
Abstract Three-dimensional simulations of the ordering of elastic capsule suspensions within planar Poiseuille flow channels are reported. The simulations utilize the immersed boundary method coupled with the lattice Boltzmann method to capture the complex flow-induced capsule deformations and hydrodynamic interactions within the suspensions. A parametric study is presented whereby the confinement ratio and the particle deformability are varied independently within a two-dimensional range relevant to this ordering phenomenon. The initial distribution of capsules is random, and the simulations evolve the system from a disordered state to an ordered one, while an order parameter that quantifies the fraction of capsules belonging to one-dimensional train assemblies is computed throughout time. A monotonic increase in ordering is observed with increasing deformability. However, an optimal confinement ratio is identified corresponding to a peak in the order parameter. This peak is attributed to the competition between increasing long-range capsule attractions and decreasing in-plane capsule density (with fixed volume fraction) as the confinement ratio increases. Simulations are also performed to understand how dispersity in capsule size and deformability impact the degree of ordering. It is shown that ordering is quite sensitive to dispersity in capsule size, and much less sensitive to dispersity in deformability. Overall, the results provide important insights for the design of microfluidic devices.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信