使用基于 CT 的计算机建模对股骨组件尺寸的解剖参考进行评估。

IF 1.6 4区 医学 Q3 ORTHOPEDICS
Journal of Knee Surgery Pub Date : 2024-07-01 Epub Date: 2024-01-08 DOI:10.1055/a-2240-3566
Brett Campbell, Max Weinberg, Jeffrey Bischoff, Giles R Scuderi
{"title":"使用基于 CT 的计算机建模对股骨组件尺寸的解剖参考进行评估。","authors":"Brett Campbell, Max Weinberg, Jeffrey Bischoff, Giles R Scuderi","doi":"10.1055/a-2240-3566","DOIUrl":null,"url":null,"abstract":"<p><p>One of the critical steps in total knee arthroplasty is femoral component positioning and sizing. Historically, there was wider variability between femoral component sizes, necessitating the concepts of anterior referencing (AR) and posterior referencing (PR). With the introduction of smaller increments between sizes, the concept of anatomic referencing has been introduced to replace AR and PR. The intent of this study was to validate the concept of anatomic referencing and show that with 2 mm increments in femoral sizes, the femoral component can be placed flush to the anterior cortex while maintaining posterior condylar offset (PCO). Digital surface models were created using 515 femurs from an established computed tomography database. Virtual bone resections, component sizing and placement were performed assuming neutral mechanical axis and a cartilage thickness of 2 mm. The appropriately sized femoral component, which had 2 mm incremental sizes, was placed flush with the anterior cortex with restoration of the PCO. The anterior-posterior distance from the posterior surface of the component to the medial and lateral surfaces of the posterior condylar cartilage were measured. The medial condyle was the limiting condyle in the majority of cases (73%). The average medial gap after appropriate femoral component matching was 0.6 mm (0.39-1.41 mm) across all sizes. The overall average condylar gap was 1.02 mm. The most common femoral component was a size 7 (57.2 mm) and the average femoral AP width was 55.9 mm. Anatomic referencing with an implant system that has 2-mm increments in femoral component sizing provides an alternative to AR and PR without compromise. Anatomic referencing allows for perfect alignment of the anterior flange of the femoral component to the anterior cortex of the femur while restoring the native PCO to within 1 mm. This avoids having to choose between AR or PR when in between femoral sizes.</p>","PeriodicalId":48798,"journal":{"name":"Journal of Knee Surgery","volume":null,"pages":null},"PeriodicalIF":1.6000,"publicationDate":"2024-07-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"An Evaluation of Anatomic Referencing for Femoral Component Sizing Using Computed Tomography-Based Computer Modeling.\",\"authors\":\"Brett Campbell, Max Weinberg, Jeffrey Bischoff, Giles R Scuderi\",\"doi\":\"10.1055/a-2240-3566\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p>One of the critical steps in total knee arthroplasty is femoral component positioning and sizing. Historically, there was wider variability between femoral component sizes, necessitating the concepts of anterior referencing (AR) and posterior referencing (PR). With the introduction of smaller increments between sizes, the concept of anatomic referencing has been introduced to replace AR and PR. The intent of this study was to validate the concept of anatomic referencing and show that with 2 mm increments in femoral sizes, the femoral component can be placed flush to the anterior cortex while maintaining posterior condylar offset (PCO). Digital surface models were created using 515 femurs from an established computed tomography database. Virtual bone resections, component sizing and placement were performed assuming neutral mechanical axis and a cartilage thickness of 2 mm. The appropriately sized femoral component, which had 2 mm incremental sizes, was placed flush with the anterior cortex with restoration of the PCO. The anterior-posterior distance from the posterior surface of the component to the medial and lateral surfaces of the posterior condylar cartilage were measured. The medial condyle was the limiting condyle in the majority of cases (73%). The average medial gap after appropriate femoral component matching was 0.6 mm (0.39-1.41 mm) across all sizes. The overall average condylar gap was 1.02 mm. The most common femoral component was a size 7 (57.2 mm) and the average femoral AP width was 55.9 mm. Anatomic referencing with an implant system that has 2-mm increments in femoral component sizing provides an alternative to AR and PR without compromise. Anatomic referencing allows for perfect alignment of the anterior flange of the femoral component to the anterior cortex of the femur while restoring the native PCO to within 1 mm. This avoids having to choose between AR or PR when in between femoral sizes.</p>\",\"PeriodicalId\":48798,\"journal\":{\"name\":\"Journal of Knee Surgery\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.6000,\"publicationDate\":\"2024-07-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Knee Surgery\",\"FirstCategoryId\":\"3\",\"ListUrlMain\":\"https://doi.org/10.1055/a-2240-3566\",\"RegionNum\":4,\"RegionCategory\":\"医学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"2024/1/8 0:00:00\",\"PubModel\":\"Epub\",\"JCR\":\"Q3\",\"JCRName\":\"ORTHOPEDICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Knee Surgery","FirstCategoryId":"3","ListUrlMain":"https://doi.org/10.1055/a-2240-3566","RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2024/1/8 0:00:00","PubModel":"Epub","JCR":"Q3","JCRName":"ORTHOPEDICS","Score":null,"Total":0}
引用次数: 0

摘要

引言 全膝关节置换术(TKA)的关键步骤之一是股骨组件的定位和尺寸。一直以来,股骨组件尺寸之间的差异较大,因此必须使用前方参照(AR)和后方参照(PR)的概念。随着尺寸之间的增量越来越小,解剖参照的概念被引入以取代 AR 和 PR。本研究的目的是验证解剖参照的概念,并证明股骨尺寸增量为2毫米时,股骨组件可与前皮质齐平,同时保持髁后偏移(PCO)。材料和方法 使用已建立的 CT 数据库中的 515 个股骨创建了数字表面模型。在假定中性机械轴和软骨厚度为 2 毫米的情况下,进行了虚拟骨切除、组件大小和放置。尺寸合适的股骨组件(增量为 2 毫米)与前部皮质齐平,并恢复 PCO。测量了从组件后表面到后髁软骨内侧和外侧表面的前后距离。结果 在大多数病例中,内侧髁是限制性髁(73%)。在所有尺寸中,股骨组件适当匹配后的内侧间隙平均为 0.6 毫米(0.39 - 1.41 毫米)。髁间隙的总体平均值为1.02毫米。最常见的股骨组件为 7 号(57.2 毫米),平均股骨 AP 宽度为 55.9 毫米。结论 通过股骨组件尺寸以2毫米为增量的植入系统进行解剖参照,可以在不影响前后参照的情况下提供另一种选择。解剖参照可以使股骨组件的前缘与股骨前皮质完美对齐,同时将原生 PCO 恢复到 1 毫米以内。这就避免了在股骨大小不一的情况下选择前方或后方参照。关键词解剖参照、TKA 股骨大小。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
An Evaluation of Anatomic Referencing for Femoral Component Sizing Using Computed Tomography-Based Computer Modeling.

One of the critical steps in total knee arthroplasty is femoral component positioning and sizing. Historically, there was wider variability between femoral component sizes, necessitating the concepts of anterior referencing (AR) and posterior referencing (PR). With the introduction of smaller increments between sizes, the concept of anatomic referencing has been introduced to replace AR and PR. The intent of this study was to validate the concept of anatomic referencing and show that with 2 mm increments in femoral sizes, the femoral component can be placed flush to the anterior cortex while maintaining posterior condylar offset (PCO). Digital surface models were created using 515 femurs from an established computed tomography database. Virtual bone resections, component sizing and placement were performed assuming neutral mechanical axis and a cartilage thickness of 2 mm. The appropriately sized femoral component, which had 2 mm incremental sizes, was placed flush with the anterior cortex with restoration of the PCO. The anterior-posterior distance from the posterior surface of the component to the medial and lateral surfaces of the posterior condylar cartilage were measured. The medial condyle was the limiting condyle in the majority of cases (73%). The average medial gap after appropriate femoral component matching was 0.6 mm (0.39-1.41 mm) across all sizes. The overall average condylar gap was 1.02 mm. The most common femoral component was a size 7 (57.2 mm) and the average femoral AP width was 55.9 mm. Anatomic referencing with an implant system that has 2-mm increments in femoral component sizing provides an alternative to AR and PR without compromise. Anatomic referencing allows for perfect alignment of the anterior flange of the femoral component to the anterior cortex of the femur while restoring the native PCO to within 1 mm. This avoids having to choose between AR or PR when in between femoral sizes.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
CiteScore
4.50
自引率
5.90%
发文量
139
期刊介绍: The Journal of Knee Surgery covers a range of issues relating to the orthopaedic techniques of arthroscopy, arthroplasty, and reconstructive surgery of the knee joint. In addition to original peer-review articles, this periodical provides details on emerging surgical techniques, as well as reviews and special focus sections. Topics of interest include cruciate ligament repair and reconstruction, bone grafting, cartilage regeneration, and magnetic resonance imaging.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信