利用悬挂式气泡张力仪测量吸附 BSA 薄膜的扩张模量:从清洁界面到饱和

IF 2.5 Q3 CHEMISTRY, PHYSICAL
Siam Hussain, Johann Eduardo Maradiaga Rivas, Wen-Chi Tseng, R. Tsay, Boris Noskov, Giuseppe Loglio, Shi-Yow Lin
{"title":"利用悬挂式气泡张力仪测量吸附 BSA 薄膜的扩张模量:从清洁界面到饱和","authors":"Siam Hussain, Johann Eduardo Maradiaga Rivas, Wen-Chi Tseng, R. Tsay, Boris Noskov, Giuseppe Loglio, Shi-Yow Lin","doi":"10.3390/colloids8010004","DOIUrl":null,"url":null,"abstract":"Two open issues on the measurement of the dilational modulus (E) for an adsorbed protein film during the adsorption process have been unacknowledged: how E varies during the adsorption and the length of time needed to attain a stable E value. A new approach for detecting the E variation from a clean air–water interface to saturated film and estimating the time needed to reach a saturated state was proposed. A pendant bubble tensiometer was utilized for measuring the relaxations of surface tension (ST) and surface area (SA), and the E was evaluated from the relaxation data of minute distinct perturbances. The data showed a clear variation in E during the BSA adsorption: E sharply decreased to a minimum at the early stage of BSA adsorption; then, it rose from this minimum and oscillated for a while before reaching an E corresponding to a saturated BSA film after a significant duration. The adsorbed BSA film took ~35 h to reach its saturated state, which was much longer than the reported lifetime of the adsorbed film in the literature. A rapid surface perturbation (forced bubble expansion/compression) could change the E, causing a significant drop in E followed by a slow increase to the original stable value.","PeriodicalId":10433,"journal":{"name":"Colloids and Interfaces","volume":"279 1","pages":""},"PeriodicalIF":2.5000,"publicationDate":"2023-12-22","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Measurement of Dilational Modulus of an Adsorbed BSA Film Using Pendant Bubble Tensiometry: From a Clean Interface to Saturation\",\"authors\":\"Siam Hussain, Johann Eduardo Maradiaga Rivas, Wen-Chi Tseng, R. Tsay, Boris Noskov, Giuseppe Loglio, Shi-Yow Lin\",\"doi\":\"10.3390/colloids8010004\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Two open issues on the measurement of the dilational modulus (E) for an adsorbed protein film during the adsorption process have been unacknowledged: how E varies during the adsorption and the length of time needed to attain a stable E value. A new approach for detecting the E variation from a clean air–water interface to saturated film and estimating the time needed to reach a saturated state was proposed. A pendant bubble tensiometer was utilized for measuring the relaxations of surface tension (ST) and surface area (SA), and the E was evaluated from the relaxation data of minute distinct perturbances. The data showed a clear variation in E during the BSA adsorption: E sharply decreased to a minimum at the early stage of BSA adsorption; then, it rose from this minimum and oscillated for a while before reaching an E corresponding to a saturated BSA film after a significant duration. The adsorbed BSA film took ~35 h to reach its saturated state, which was much longer than the reported lifetime of the adsorbed film in the literature. A rapid surface perturbation (forced bubble expansion/compression) could change the E, causing a significant drop in E followed by a slow increase to the original stable value.\",\"PeriodicalId\":10433,\"journal\":{\"name\":\"Colloids and Interfaces\",\"volume\":\"279 1\",\"pages\":\"\"},\"PeriodicalIF\":2.5000,\"publicationDate\":\"2023-12-22\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Colloids and Interfaces\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.3390/colloids8010004\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"CHEMISTRY, PHYSICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Colloids and Interfaces","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.3390/colloids8010004","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}
引用次数: 0

摘要

在吸附过程中测量被吸附蛋白质薄膜的扩张模量(E)方面,有两个尚未解决的问题:E 在吸附过程中如何变化,以及获得稳定 E 值所需的时间长度。我们提出了一种新方法来检测从清洁空气-水界面到饱和薄膜的 E 值变化,并估算达到饱和状态所需的时间。利用悬挂式气泡张力计测量表面张力(ST)和表面积(SA)的弛豫,并根据微小不同扰动的弛豫数据评估 E。数据显示,在吸附 BSA 的过程中 E 有明显的变化:在吸附 BSA 的初期,E 值急剧下降至最小值;随后,E 值从最小值开始上升并震荡了一段时间,在相当长的一段时间后达到与饱和 BSA 膜相对应的 E 值。吸附的 BSA 薄膜需要约 35 小时才能达到饱和状态,这比文献中报道的吸附薄膜的寿命要长得多。快速的表面扰动(强制气泡膨胀/压缩)会改变 E 值,导致 E 值显著下降,然后缓慢上升到原始稳定值。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Measurement of Dilational Modulus of an Adsorbed BSA Film Using Pendant Bubble Tensiometry: From a Clean Interface to Saturation
Two open issues on the measurement of the dilational modulus (E) for an adsorbed protein film during the adsorption process have been unacknowledged: how E varies during the adsorption and the length of time needed to attain a stable E value. A new approach for detecting the E variation from a clean air–water interface to saturated film and estimating the time needed to reach a saturated state was proposed. A pendant bubble tensiometer was utilized for measuring the relaxations of surface tension (ST) and surface area (SA), and the E was evaluated from the relaxation data of minute distinct perturbances. The data showed a clear variation in E during the BSA adsorption: E sharply decreased to a minimum at the early stage of BSA adsorption; then, it rose from this minimum and oscillated for a while before reaching an E corresponding to a saturated BSA film after a significant duration. The adsorbed BSA film took ~35 h to reach its saturated state, which was much longer than the reported lifetime of the adsorbed film in the literature. A rapid surface perturbation (forced bubble expansion/compression) could change the E, causing a significant drop in E followed by a slow increase to the original stable value.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Colloids and Interfaces
Colloids and Interfaces CHEMISTRY, PHYSICAL-
CiteScore
3.90
自引率
4.20%
发文量
64
审稿时长
10 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信