Annealing Effects of ZnO Thin Film on Photocatalytic Performances of Graphene Composites

The hybrid structure of Graphene and ZnO (Graphene/ZnO) is emerging as a novel material used to achieve the high performance of photocatalysis. In this study, we examined the ZnO characteristics that affect the photocatalytic activity of graphene/ZnO using a lamellar structure of graphene and ZnO thin films. Graphene samples were synthesized via chemical vapor deposition, and a typical wet process was applied to transfer them on sputter-deposited ZnO thin films with and without annealing. We confirmed that graphene-deposited ZnO demonstrated more efficient photocatalytic behavior toward the decomposition of methylene blue (as a model organic compound) with ordinary sputtered ZnO thin films. Again, ZnO thin films annealed at 1000 °C in an N2 gas atmosphere with graphene performed better than unannealed films. XRD analysis confirmed that pre-thermal treatment of a ZnO thin film promoted re-crystallization, which had less impact on the photocatalytic improvement. The attachment of graphene to the film is considered to contribute to the enhancement. Raman analysis revealed that the graphene coverage areas on the post-annealed ZnO increased by two times compared to that of an unannealed film where the unannealed film had a higher graphene layer. The results presented in this study demonstrate that an annealed ZnO thin film forms a better attachment with graphene, resulting in a larger graphene coverage area with fewer multilayers, which effectively improves the photocatalytic activity in composite structures.