Modeling of radial growth curves and radial variation of basic density in Chamaecyparis obtusa planted in two progeny test sites

The objectives of the present study are to clarify the effect of macro- and micro-environment on the radial growth patterns and radial variation patterns of basic density in hinoki cypress (Chamaecyparis obtusa (Sieb. et Zucc.) Endl.). We evaluated the radial variation patterns of cumulative annual ring width (as radial growth pattern) and basic density by modeling methods using hinoki cypress 36 families planted at two progeny test sites. In addition, narrow-sense heritability and correlation between sites for annual ring width and basic density were investigated. As the results of modeling for radial growth patterns, radial growth patterns slightly differed between sites. In addition, the stem diameter reaching the plateau might be varied among blocks in a site. On the other hand, radial variation of basic density was affected by genetic factors rather than blocks in the site. However, the radial growth rate may somewhat affect the radial variation of basic density. The heritability and correlation coefficients between sites in basic density were higher than those of annual ring width. Therefore, although radial growth in hinoki cypress varies by the effects of micro- and macro-environmental factors and has some influence on the radial variation of basic density, basic density is more strongly affected by genetic factors than by these influences, allowing for effective improvement for wood density by tree breeding program.