动脉瘤和壁间夹层中主动脉变形的数学分析

Q3 Mathematics
A.E. Medvedev, A.D. Erokhin
{"title":"动脉瘤和壁间夹层中主动脉变形的数学分析","authors":"A.E. Medvedev, A.D. Erokhin","doi":"10.17537/2023.18.464","DOIUrl":null,"url":null,"abstract":"\n Aortic dissection is an extremely severe pathology. From the mechanics point of view, the aorta is a multilayered anisotropic reinforced shell, which is subjected to periodic loading under the action of pulse blood pressure. The questions of mathematical modeling of aorta and large arteries dissection are considered. A review of modern mathematical models of aortic and arterial wall structure obtained on the basis of experimental data processing on biaxial stretching of samples is carried out. Mathematical models can be conditionally divided into two classes: 1) effective models, when the internal structure of the wall structure is ignored, but the mechanical parameters of the material \"averaged\" over the wall thickness are introduced; 2) structured models, when the multilayer (up to three layers) structure of the artery is taken into account with the addition of one to four families of reinforcing fibers. One of the most widely used artery models, the Holzapfel – Hasser – Ogden model, is considered in detail. This model describes a two or three-layered artery with two families of reinforcing fibers. For this model tables of design parameters are given, numerical calculations of arterial rupture and dissection are carried out. The blood vessel is subjected to pulse pressure of blood flowing through it. It is shown that rupture of the inner layer of the vessel leads to an increase in the stress on the outer wall of the vessel. Increasing the thickness and length of the rupture increases the stresses on the outer wall of the vessel. The presence of an aneurysm of the vessel increases stresses twice as much as a vessel without an aneurysm. Splitting of the inner wall of the vessel leads to an increase in stresses on the wall – stresses fall with increasing rupture width for a straight vessel and rise for a vessel with an aneurysm. Stress calculations at the “tip” of delamination showed that the maximum stress is reached at the outer wall of the rupture.\n","PeriodicalId":53525,"journal":{"name":"Mathematical Biology and Bioinformatics","volume":"43 4","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-12-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Mathematical Analysis of Aortic Deformation in Aneurysm and Wall Dissection\",\"authors\":\"A.E. Medvedev, A.D. Erokhin\",\"doi\":\"10.17537/2023.18.464\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"\\n Aortic dissection is an extremely severe pathology. From the mechanics point of view, the aorta is a multilayered anisotropic reinforced shell, which is subjected to periodic loading under the action of pulse blood pressure. The questions of mathematical modeling of aorta and large arteries dissection are considered. A review of modern mathematical models of aortic and arterial wall structure obtained on the basis of experimental data processing on biaxial stretching of samples is carried out. Mathematical models can be conditionally divided into two classes: 1) effective models, when the internal structure of the wall structure is ignored, but the mechanical parameters of the material \\\"averaged\\\" over the wall thickness are introduced; 2) structured models, when the multilayer (up to three layers) structure of the artery is taken into account with the addition of one to four families of reinforcing fibers. One of the most widely used artery models, the Holzapfel – Hasser – Ogden model, is considered in detail. This model describes a two or three-layered artery with two families of reinforcing fibers. For this model tables of design parameters are given, numerical calculations of arterial rupture and dissection are carried out. The blood vessel is subjected to pulse pressure of blood flowing through it. It is shown that rupture of the inner layer of the vessel leads to an increase in the stress on the outer wall of the vessel. Increasing the thickness and length of the rupture increases the stresses on the outer wall of the vessel. The presence of an aneurysm of the vessel increases stresses twice as much as a vessel without an aneurysm. Splitting of the inner wall of the vessel leads to an increase in stresses on the wall – stresses fall with increasing rupture width for a straight vessel and rise for a vessel with an aneurysm. Stress calculations at the “tip” of delamination showed that the maximum stress is reached at the outer wall of the rupture.\\n\",\"PeriodicalId\":53525,\"journal\":{\"name\":\"Mathematical Biology and Bioinformatics\",\"volume\":\"43 4\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-12-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Mathematical Biology and Bioinformatics\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.17537/2023.18.464\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"Mathematics\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Mathematical Biology and Bioinformatics","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.17537/2023.18.464","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"Mathematics","Score":null,"Total":0}
引用次数: 0

摘要

主动脉夹层是一种非常严重的病理。从力学角度看,主动脉是一个多层各向异性的增强壳,在脉搏血压的作用下承受周期性的载荷。讨论了主动脉和大动脉夹层的数学建模问题。本文综述了在对样品双轴拉伸实验数据处理的基础上建立的主动脉和动脉壁结构的现代数学模型。数学模型可有条件地分为两类:1)有效模型,即忽略墙体结构的内部结构,但引入材料在壁厚上的“平均”力学参数;2)结构模型,当考虑到动脉的多层(最多三层)结构,并添加一到四族增强纤维时。其中最广泛使用的动脉模型,Holzapfel - Hasser - Ogden模型,详细考虑。这个模型描述了一个两层或三层的动脉,有两族的增强纤维。对该模型给出了设计参数表,并进行了动脉破裂和夹层的数值计算。血管受到流经它的血液的脉压的影响。结果表明,血管内层破裂导致血管外壁应力增大。增加破裂的厚度和长度会增加血管外壁的应力。有动脉瘤的血管增加的压力是没有动脉瘤的血管的两倍。血管内壁的分裂导致血管壁上的应力增加——对于直血管,应力随破裂宽度的增加而下降,而对于有动脉瘤的血管,应力则升高。在分层“尖端”处的应力计算表明,在破裂的外壁处达到最大应力。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Mathematical Analysis of Aortic Deformation in Aneurysm and Wall Dissection
Aortic dissection is an extremely severe pathology. From the mechanics point of view, the aorta is a multilayered anisotropic reinforced shell, which is subjected to periodic loading under the action of pulse blood pressure. The questions of mathematical modeling of aorta and large arteries dissection are considered. A review of modern mathematical models of aortic and arterial wall structure obtained on the basis of experimental data processing on biaxial stretching of samples is carried out. Mathematical models can be conditionally divided into two classes: 1) effective models, when the internal structure of the wall structure is ignored, but the mechanical parameters of the material "averaged" over the wall thickness are introduced; 2) structured models, when the multilayer (up to three layers) structure of the artery is taken into account with the addition of one to four families of reinforcing fibers. One of the most widely used artery models, the Holzapfel – Hasser – Ogden model, is considered in detail. This model describes a two or three-layered artery with two families of reinforcing fibers. For this model tables of design parameters are given, numerical calculations of arterial rupture and dissection are carried out. The blood vessel is subjected to pulse pressure of blood flowing through it. It is shown that rupture of the inner layer of the vessel leads to an increase in the stress on the outer wall of the vessel. Increasing the thickness and length of the rupture increases the stresses on the outer wall of the vessel. The presence of an aneurysm of the vessel increases stresses twice as much as a vessel without an aneurysm. Splitting of the inner wall of the vessel leads to an increase in stresses on the wall – stresses fall with increasing rupture width for a straight vessel and rise for a vessel with an aneurysm. Stress calculations at the “tip” of delamination showed that the maximum stress is reached at the outer wall of the rupture.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Mathematical Biology and Bioinformatics
Mathematical Biology and Bioinformatics Mathematics-Applied Mathematics
CiteScore
1.10
自引率
0.00%
发文量
13
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信