【光照时间对可见光固化复合材料硬度的影响】。

Ankara Universitesi Dis Hekimligi Fakultesi dergisi = The Journal of the Dental Faculty of Ankara University Pub Date : 1989-05-01

L Zaimoğlu, D Dalat, F Saklar

{"title":"【光照时间对可见光固化复合材料硬度的影响】。","authors":"L Zaimoğlu, D Dalat, F Saklar","doi":"","DOIUrl":null,"url":null,"abstract":"In this article effect of light exposure time on hardness of visible light cured composites with different microfiller ratios were investigated. For this purpose specimens with heights 1, 2, 3 mm and 6 mm in diameter were prepared. During the preparation of the specimens, half of the specimens were cured with visible light for 40 seconds and the other half for 60 seconds. Surface hardness values were measured from the top and bottom of the specimens immediately after the light source was removed with Barcol Hardness tester. Surface hardness were also measured 24 hours and 7 days later. Results were statistically evaluated.","PeriodicalId":77487,"journal":{"name":"Ankara Universitesi Dis Hekimligi Fakultesi dergisi = The Journal of the Dental Faculty of Ankara University","volume":"16 1","pages":"147-53"},"PeriodicalIF":0.0000,"publicationDate":"1989-05-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"[Effect of light exposure time on hardness of visible light cured composites].\",\"authors\":\"L Zaimoğlu, D Dalat, F Saklar\",\"doi\":\"\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this article effect of light exposure time on hardness of visible light cured composites with different microfiller ratios were investigated. For this purpose specimens with heights 1, 2, 3 mm and 6 mm in diameter were prepared. During the preparation of the specimens, half of the specimens were cured with visible light for 40 seconds and the other half for 60 seconds. Surface hardness values were measured from the top and bottom of the specimens immediately after the light source was removed with Barcol Hardness tester. Surface hardness were also measured 24 hours and 7 days later. Results were statistically evaluated.\",\"PeriodicalId\":77487,\"journal\":{\"name\":\"Ankara Universitesi Dis Hekimligi Fakultesi dergisi = The Journal of the Dental Faculty of Ankara University\",\"volume\":\"16 1\",\"pages\":\"147-53\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1989-05-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Ankara Universitesi Dis Hekimligi Fakultesi dergisi = The Journal of the Dental Faculty of Ankara University\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ankara Universitesi Dis Hekimligi Fakultesi dergisi = The Journal of the Dental Faculty of Ankara University","FirstCategoryId":"1085","ListUrlMain":"","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

研究了不同微填料配比可见光固化复合材料的光固化时间对其硬度的影响。为此，制备了高度为1,2,3mm和6mm直径的标本。在标本制备过程中，一半标本用可见光固化40秒，另一半标本用可见光固化60秒。去除光源后，立即用巴氏硬度计从试样的顶部和底部测量表面硬度值。24 h和7 d后测定表面硬度。对结果进行统计学评价。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

本刊更多论文

[Effect of light exposure time on hardness of visible light cured composites].

In this article effect of light exposure time on hardness of visible light cured composites with different microfiller ratios were investigated. For this purpose specimens with heights 1, 2, 3 mm and 6 mm in diameter were prepared. During the preparation of the specimens, half of the specimens were cured with visible light for 40 seconds and the other half for 60 seconds. Surface hardness values were measured from the top and bottom of the specimens immediately after the light source was removed with Barcol Hardness tester. Surface hardness were also measured 24 hours and 7 days later. Results were statistically evaluated.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Ankara Universitesi Dis Hekimligi Fakultesi dergisi = The Journal of the Dental Faculty of Ankara University

自引率

0.00%

发文量