基于arduino的相变材料抛物面太阳能集热器温度传感器的标定

Ahmadi Ahmadi, Adi Setiawan, Gunawati Gunawati, Rozanna Dewi
{"title":"基于arduino的相变材料抛物面太阳能集热器温度传感器的标定","authors":"Ahmadi Ahmadi, Adi Setiawan, Gunawati Gunawati, Rozanna Dewi","doi":"10.46574/motivection.v5i3.220","DOIUrl":null,"url":null,"abstract":"The development of energy storage materials requires facilities for testing the materials' ability to store and release energy effectively. This study focuses on the development and calibration of a temperature measurement system for parabolic solar collectors equipped with heat storage media. We employed type-K thermocouples and MAX6675 modules with Arduino as our measurement tools. The calibration process involved comparing sensor measurements with those obtained from commercially calibrated instruments using seven different test materials. The calibration results demonstrated that our sensors exhibited an error rate ranging from 0.66 to 0.73, indicating their accuracy and suitability for monitoring temperature fluctuations in solar thermal collectors.
 Pengembangan material penyimpan energi thermal membutuhkan sarana untuk uji coba kemampuan bahan dalam menyimpan dan melepaskan energi. Penelitian ini fokus pada pengembangan dan kalibrasi sistem pengukuran temperatur untuk kolektor surya parabola yang memiliki media penyimpanan panas. Kami menggunakan sensor termokopel tipe-K dan modul MAX6675 dengan Arduino sebagai alat pengukuran. Proses kalibrasi melibatkan perbandingan hasil pengukuran sensor dengan alat komersil yang sudah terkalibrasi pada tujuh bahan uji yang berbeda. Hasil kalibrasi menunjukkan bahwa sensor kami memiliki tingkat kesalahan antara 0.66 hingga 0.73, menunjukkan bahwa sensor kami sudah akurat dan dapat digunakan untuk memonitor perubahan suhu pada kolektor surya termal.","PeriodicalId":489188,"journal":{"name":"Motivection","volume":"61 4","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2023-10-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Calibration of Arduino-based Temperature Sensors for Parabolic Solar Collectors with Phase Change Material\",\"authors\":\"Ahmadi Ahmadi, Adi Setiawan, Gunawati Gunawati, Rozanna Dewi\",\"doi\":\"10.46574/motivection.v5i3.220\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The development of energy storage materials requires facilities for testing the materials' ability to store and release energy effectively. This study focuses on the development and calibration of a temperature measurement system for parabolic solar collectors equipped with heat storage media. We employed type-K thermocouples and MAX6675 modules with Arduino as our measurement tools. The calibration process involved comparing sensor measurements with those obtained from commercially calibrated instruments using seven different test materials. The calibration results demonstrated that our sensors exhibited an error rate ranging from 0.66 to 0.73, indicating their accuracy and suitability for monitoring temperature fluctuations in solar thermal collectors.
 Pengembangan material penyimpan energi thermal membutuhkan sarana untuk uji coba kemampuan bahan dalam menyimpan dan melepaskan energi. Penelitian ini fokus pada pengembangan dan kalibrasi sistem pengukuran temperatur untuk kolektor surya parabola yang memiliki media penyimpanan panas. Kami menggunakan sensor termokopel tipe-K dan modul MAX6675 dengan Arduino sebagai alat pengukuran. Proses kalibrasi melibatkan perbandingan hasil pengukuran sensor dengan alat komersil yang sudah terkalibrasi pada tujuh bahan uji yang berbeda. Hasil kalibrasi menunjukkan bahwa sensor kami memiliki tingkat kesalahan antara 0.66 hingga 0.73, menunjukkan bahwa sensor kami sudah akurat dan dapat digunakan untuk memonitor perubahan suhu pada kolektor surya termal.\",\"PeriodicalId\":489188,\"journal\":{\"name\":\"Motivection\",\"volume\":\"61 4\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-10-27\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Motivection\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.46574/motivection.v5i3.220\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Motivection","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.46574/motivection.v5i3.220","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

摘要

储能材料的开发需要测试材料有效存储和释放能量的能力的设备。本文研究了一种用于蓄热介质的抛物面太阳能集热器的温度测量系统的研制与标定。我们使用k型热电偶和MAX6675模块与Arduino作为我们的测量工具。校准过程包括将传感器测量值与使用七种不同测试材料的商业校准仪器获得的测量值进行比较。校准结果表明,该传感器的误差率在0.66 ~ 0.73之间,表明了其监测太阳能集热器温度波动的准确性和适用性。penembangan材料penyimpan energi thermal membutuhkan sarana untuk uji coba kemampuan bahan dalam menyimpan dan melepaskan energi。Penelitian ini focus pada pengembangan dankalbrasi系统企鹅的温度,untuk kolektor surya抛物线,yang memiliki媒体penyimpanan panas。Kami - mongunakan传感器termokopel - k - dan模块MAX6675 dengan Arduino sebagai alatpenguan。企鹅传感器dengan alat komersil yang sudah terkalibrasi pada tujuh bahan uji yang berbeda。【翻译】:menunjukkan bahwa传感器kami memiliki tingkat kesalahan antara 0.66, ingga 0.73, menunjukkan bahwa传感器kami sudah akurat dan dapat digunakan untuk monitor
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Calibration of Arduino-based Temperature Sensors for Parabolic Solar Collectors with Phase Change Material
The development of energy storage materials requires facilities for testing the materials' ability to store and release energy effectively. This study focuses on the development and calibration of a temperature measurement system for parabolic solar collectors equipped with heat storage media. We employed type-K thermocouples and MAX6675 modules with Arduino as our measurement tools. The calibration process involved comparing sensor measurements with those obtained from commercially calibrated instruments using seven different test materials. The calibration results demonstrated that our sensors exhibited an error rate ranging from 0.66 to 0.73, indicating their accuracy and suitability for monitoring temperature fluctuations in solar thermal collectors. Pengembangan material penyimpan energi thermal membutuhkan sarana untuk uji coba kemampuan bahan dalam menyimpan dan melepaskan energi. Penelitian ini fokus pada pengembangan dan kalibrasi sistem pengukuran temperatur untuk kolektor surya parabola yang memiliki media penyimpanan panas. Kami menggunakan sensor termokopel tipe-K dan modul MAX6675 dengan Arduino sebagai alat pengukuran. Proses kalibrasi melibatkan perbandingan hasil pengukuran sensor dengan alat komersil yang sudah terkalibrasi pada tujuh bahan uji yang berbeda. Hasil kalibrasi menunjukkan bahwa sensor kami memiliki tingkat kesalahan antara 0.66 hingga 0.73, menunjukkan bahwa sensor kami sudah akurat dan dapat digunakan untuk memonitor perubahan suhu pada kolektor surya termal.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信