Simulation of Porosity Regrowth during Heat Treatment after Hot Isostatic Pressing in Titanium Components

Abstract Additive manufacturing (AM) is driven by design freedom, having fewer process constraints than traditional manufacturing processes. It requires careful process control and qualified parameters to create dense metal parts. However, defects in the form of cavities can be detected in as-built specimens by computed tomography. Post-processing techniques such as hot isostatic pressing (HIP) are applied to eliminate porosity, but regrowth of argon gas pores is observed after additional heat treatment. In this work, a mesoscopic heat treatment simulation of an argon-filled gas pore in titanium components is presented. A combination of HIP and high-temperature heat treatment for β -annealing is simulated. Calculated pore regrowth is qualitatively consistent with experimental observation from the literature. Simulation results support the hypothesis of argon not dissolving in the titanium matrix by assuming a constant amount of argon particles in the pore. Mesoscopic heat treatment simulations may be a part of a simulation-driven optimization of thermal post-processing to improve the quality and performance of AM components.