Performance Evaluation of a Wet Medium Made of Mangosteen Peels for a Direct Evaporative Cooling System

The present study aimed to investigate an alternative evaporative cooling pad material made from mangosteen peel (MP) waste. Mangosteen peels were used to fill a 150 mm thick mesh container with a packing density of 180 kg/m3. A wind tunnel was constructed and utilized to experimentally evaluate the cooling performance of this organic-waste-based pad under hot and humid conditions (31–34 °C and 55–70% RH). The performance parameters assessed included pressure drop, temperature drop, saturation effectiveness, cooling capacity, and coefficient of performance (COP). The influence of air velocity (0.7, 1.0, 1.4, and 1.8 m/s) on these parameters was also examined. The results revealed that the saturation effectiveness of the MP pad ranged from 53% to 77% within the considered air velocity range. The maximum temperature drop (4.6 °C), saturation effectiveness (77%), cooling capacity (0.6 kW), and COP (3.5) were achieved when the system operated at 1.4 m/s. A comparative study showed that, at this velocity, the MP pad provided performance nearly equivalent to that of the commercial cellulose paper pad, except for the pressure drop. This result affirms the potential of mangosteen peels as a suitable wet medium for evaporative cooling applications.