{"title":"现代永磁精加工中表面粗糙度的研究","authors":"Baqer A. Ahmed, Mohammed S. Jabbar","doi":"10.30572/2018/kje/140402","DOIUrl":null,"url":null,"abstract":"This work introduces an investigation of the surface roughness (Ra) during flat plate machining utilizing magnetic abrasive finishing process (MAF). In this study three parameters (Machining time, Mesh size, and Gap) were studied. The MAF tool is made from permanent magnet and the abrasive powder is consisting of 40% of SiC and 60% Fe powder with three Mesh size (100, 250, and 400 µm). The Taguchi L9 array was used in designing the experiments. The results show that the increasing machining time caused a decrease in Ra. The increase in mesh size and the gap will increase the surface roughness. The dominant factor that affect the surface roughness was the machining time due to enough time to machine the target surface.","PeriodicalId":32466,"journal":{"name":"Magallat Alkufat Alhandasiyyat","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2023-10-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"INVESTIGATION OF SURFACE ROUGHNESS IN MODERN FINISHING PROCESS USING PERMANENT MAGNET\",\"authors\":\"Baqer A. Ahmed, Mohammed S. Jabbar\",\"doi\":\"10.30572/2018/kje/140402\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This work introduces an investigation of the surface roughness (Ra) during flat plate machining utilizing magnetic abrasive finishing process (MAF). In this study three parameters (Machining time, Mesh size, and Gap) were studied. The MAF tool is made from permanent magnet and the abrasive powder is consisting of 40% of SiC and 60% Fe powder with three Mesh size (100, 250, and 400 µm). The Taguchi L9 array was used in designing the experiments. The results show that the increasing machining time caused a decrease in Ra. The increase in mesh size and the gap will increase the surface roughness. The dominant factor that affect the surface roughness was the machining time due to enough time to machine the target surface.\",\"PeriodicalId\":32466,\"journal\":{\"name\":\"Magallat Alkufat Alhandasiyyat\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-10-31\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Magallat Alkufat Alhandasiyyat\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.30572/2018/kje/140402\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Magallat Alkufat Alhandasiyyat","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.30572/2018/kje/140402","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
INVESTIGATION OF SURFACE ROUGHNESS IN MODERN FINISHING PROCESS USING PERMANENT MAGNET
This work introduces an investigation of the surface roughness (Ra) during flat plate machining utilizing magnetic abrasive finishing process (MAF). In this study three parameters (Machining time, Mesh size, and Gap) were studied. The MAF tool is made from permanent magnet and the abrasive powder is consisting of 40% of SiC and 60% Fe powder with three Mesh size (100, 250, and 400 µm). The Taguchi L9 array was used in designing the experiments. The results show that the increasing machining time caused a decrease in Ra. The increase in mesh size and the gap will increase the surface roughness. The dominant factor that affect the surface roughness was the machining time due to enough time to machine the target surface.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
