{"title":"确定人员疏散救援手段的强度稳定性","authors":"Е.А. Анохин, А.В. Кочегаров, П.П. Коркунов, И.И. Переславцева","doi":"10.36622/vstu.2023.26.3.003","DOIUrl":null,"url":null,"abstract":"В статье рассматривается спасательное устройство (трап-горка) для быстрой эвакуации людей из зданий высотой 2…3 этажа. Предлагаемое техническое устройство представляет собой средство для быстрого спуска с верхних этажей зданий и сооружений и других объектов при пожарах или аварийных ситуациях, участок скольжения которой имеет закрытую секцию. Конструктивное исполнение изделия выполнено по требованиям действующих нормативных документов – СП20.13330.2016 Нагрузки и воздействия. Актуализированная редакция СНиП2.01.07-85*. Для определения устойчивости спасательного устройства выполнен расчет конструкции опорной части для трапа-горки. Все технические предложения, принятые при проектировании и конструировании устройства, соответствуют требованиям экологических, санитарно-гигиенических, противопожарных и других норм, определенных на территории Российской Федерации, и обеспечивают безопасность для жизни и здоровья спасаемых и окружающих людей. В соответствии с нормативными документами был произведен расчет на прочность и устойчивость спасательного устройства, принимая во внимание следующие параметры: постоянные нагрузки, вызываемые собственным весом конструкции, снеговые и ветровые нагрузки, нагрузки от пользователей. С помощью системы автоматизированного проектирования были определены усилия в несущих конструкциях и произведен расчет на прочность. Также был произведен расчет металлической стойки на прочность, по итогам которого условие прочности сопротивления сечения изгибу обеспечено. The article discusses a rescue means for rapid evacuation of people from small heights of buildings (2…3 floors of height). The technical means is a designed for quick descent from the upper floors of buildings and structures and other facilities, in case of fires or emergencies, the sliding section of which has got a closed section. The design of the means is made in accordance with the requirements of current regulatory documents – SP20.13330.2016 Loads and impacts. Updated version of SNiP 2.01.07-85 *. Determining the stability of the rescue means, we performed the calculation of the structure of the supporting part for the ladder-slide. All technical proposals adopted in the design and construction of the device comply with the requirements of environmental, sanitary, hygienic, fire and other standards existing on the territory of the Russian Federation, and ensure safety for the life and health of the rescued and surrounding people. In accordance with the regulatory documents, we calculated the strength and stability of the rescue means, taking into account the following: constant loads caused by the bodyweight of the structure, snow and wind loads, loads from users. With the help of a computer-aided design system, we determined the forces in the load-bearing structures and calculated the strength. We also calculated the metal rack for strength, according to which the condition strength is performed, respectively, ensured the strength of the bending section.","PeriodicalId":495042,"journal":{"name":"Žiliŝnoe hozâjstvo i kommunalʹnaâ infrastruktura","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2023-10-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"DETERMINING THE STRENGTH STABILITY OF A RESCUE MEANS FOR PEOPLE EVACUATION\",\"authors\":\"Е.А. Анохин, А.В. Кочегаров, П.П. Коркунов, И.И. Переславцева\",\"doi\":\"10.36622/vstu.2023.26.3.003\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"В статье рассматривается спасательное устройство (трап-горка) для быстрой эвакуации людей из зданий высотой 2…3 этажа. Предлагаемое техническое устройство представляет собой средство для быстрого спуска с верхних этажей зданий и сооружений и других объектов при пожарах или аварийных ситуациях, участок скольжения которой имеет закрытую секцию. Конструктивное исполнение изделия выполнено по требованиям действующих нормативных документов – СП20.13330.2016 Нагрузки и воздействия. Актуализированная редакция СНиП2.01.07-85*. Для определения устойчивости спасательного устройства выполнен расчет конструкции опорной части для трапа-горки. Все технические предложения, принятые при проектировании и конструировании устройства, соответствуют требованиям экологических, санитарно-гигиенических, противопожарных и других норм, определенных на территории Российской Федерации, и обеспечивают безопасность для жизни и здоровья спасаемых и окружающих людей. В соответствии с нормативными документами был произведен расчет на прочность и устойчивость спасательного устройства, принимая во внимание следующие параметры: постоянные нагрузки, вызываемые собственным весом конструкции, снеговые и ветровые нагрузки, нагрузки от пользователей. С помощью системы автоматизированного проектирования были определены усилия в несущих конструкциях и произведен расчет на прочность. Также был произведен расчет металлической стойки на прочность, по итогам которого условие прочности сопротивления сечения изгибу обеспечено. The article discusses a rescue means for rapid evacuation of people from small heights of buildings (2…3 floors of height). The technical means is a designed for quick descent from the upper floors of buildings and structures and other facilities, in case of fires or emergencies, the sliding section of which has got a closed section. The design of the means is made in accordance with the requirements of current regulatory documents – SP20.13330.2016 Loads and impacts. Updated version of SNiP 2.01.07-85 *. Determining the stability of the rescue means, we performed the calculation of the structure of the supporting part for the ladder-slide. All technical proposals adopted in the design and construction of the device comply with the requirements of environmental, sanitary, hygienic, fire and other standards existing on the territory of the Russian Federation, and ensure safety for the life and health of the rescued and surrounding people. In accordance with the regulatory documents, we calculated the strength and stability of the rescue means, taking into account the following: constant loads caused by the bodyweight of the structure, snow and wind loads, loads from users. With the help of a computer-aided design system, we determined the forces in the load-bearing structures and calculated the strength. We also calculated the metal rack for strength, according to which the condition strength is performed, respectively, ensured the strength of the bending section.\",\"PeriodicalId\":495042,\"journal\":{\"name\":\"Žiliŝnoe hozâjstvo i kommunalʹnaâ infrastruktura\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-10-13\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Žiliŝnoe hozâjstvo i kommunalʹnaâ infrastruktura\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.36622/vstu.2023.26.3.003\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Žiliŝnoe hozâjstvo i kommunalʹnaâ infrastruktura","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.36622/vstu.2023.26.3.003","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
DETERMINING THE STRENGTH STABILITY OF A RESCUE MEANS FOR PEOPLE EVACUATION
В статье рассматривается спасательное устройство (трап-горка) для быстрой эвакуации людей из зданий высотой 2…3 этажа. Предлагаемое техническое устройство представляет собой средство для быстрого спуска с верхних этажей зданий и сооружений и других объектов при пожарах или аварийных ситуациях, участок скольжения которой имеет закрытую секцию. Конструктивное исполнение изделия выполнено по требованиям действующих нормативных документов – СП20.13330.2016 Нагрузки и воздействия. Актуализированная редакция СНиП2.01.07-85*. Для определения устойчивости спасательного устройства выполнен расчет конструкции опорной части для трапа-горки. Все технические предложения, принятые при проектировании и конструировании устройства, соответствуют требованиям экологических, санитарно-гигиенических, противопожарных и других норм, определенных на территории Российской Федерации, и обеспечивают безопасность для жизни и здоровья спасаемых и окружающих людей. В соответствии с нормативными документами был произведен расчет на прочность и устойчивость спасательного устройства, принимая во внимание следующие параметры: постоянные нагрузки, вызываемые собственным весом конструкции, снеговые и ветровые нагрузки, нагрузки от пользователей. С помощью системы автоматизированного проектирования были определены усилия в несущих конструкциях и произведен расчет на прочность. Также был произведен расчет металлической стойки на прочность, по итогам которого условие прочности сопротивления сечения изгибу обеспечено. The article discusses a rescue means for rapid evacuation of people from small heights of buildings (2…3 floors of height). The technical means is a designed for quick descent from the upper floors of buildings and structures and other facilities, in case of fires or emergencies, the sliding section of which has got a closed section. The design of the means is made in accordance with the requirements of current regulatory documents – SP20.13330.2016 Loads and impacts. Updated version of SNiP 2.01.07-85 *. Determining the stability of the rescue means, we performed the calculation of the structure of the supporting part for the ladder-slide. All technical proposals adopted in the design and construction of the device comply with the requirements of environmental, sanitary, hygienic, fire and other standards existing on the territory of the Russian Federation, and ensure safety for the life and health of the rescued and surrounding people. In accordance with the regulatory documents, we calculated the strength and stability of the rescue means, taking into account the following: constant loads caused by the bodyweight of the structure, snow and wind loads, loads from users. With the help of a computer-aided design system, we determined the forces in the load-bearing structures and calculated the strength. We also calculated the metal rack for strength, according to which the condition strength is performed, respectively, ensured the strength of the bending section.