氢对点焊超高强度trip辅助马氏体钢板抗拉剪切强度的影响

IF 0.3 4区材料科学 Q4 METALLURGY & METALLURGICAL ENGINEERING

Tetsu To Hagane-journal of The Iron and Steel Institute of Japan Pub Date : 2023-01-01 DOI:10.2355/tetsutohagane.tetsu-2023-077

Tomohiko Hojo, Akihiko Nagasaka, Ryusei Wakabayashi, Chihaya Tabata, Yota Kondo, Kazuma Ogasawara, Yuki Shibayama, Eiji Akiyama

{"title":"氢对点焊超高强度trip辅助马氏体钢板抗拉剪切强度的影响","authors":"Tomohiko Hojo, Akihiko Nagasaka, Ryusei Wakabayashi, Chihaya Tabata, Yota Kondo, Kazuma Ogasawara, Yuki Shibayama, Eiji Akiyama","doi":"10.2355/tetsutohagane.tetsu-2023-077","DOIUrl":null,"url":null,"abstract":"In this study, the effect of hydrogen on the tensile shear strength of spot-welded transformation-induced plasticity (TRIP)-aided martensitic (TM) steel sheet was investigated. The tensile shear tests were carried out on a tensile testing machine using the spot-welded specimen which was spot-welded at the lapped portion of 30 mm×30 mm using specimen with dimensions of width of 30 mm and length of 170 mm at crosshead speeds of v=0.5 to 100 mm/min with and without hydrogen. The results were summarized as follows.","PeriodicalId":22340,"journal":{"name":"Tetsu To Hagane-journal of The Iron and Steel Institute of Japan","volume":"33 1","pages":"0"},"PeriodicalIF":0.3000,"publicationDate":"2023-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of Hydrogen on Tensile Shear Strength of Spot-Welded Ultrahigh-Strength TRIP-Aided Martensitic Steel Sheet\",\"authors\":\"Tomohiko Hojo, Akihiko Nagasaka, Ryusei Wakabayashi, Chihaya Tabata, Yota Kondo, Kazuma Ogasawara, Yuki Shibayama, Eiji Akiyama\",\"doi\":\"10.2355/tetsutohagane.tetsu-2023-077\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In this study, the effect of hydrogen on the tensile shear strength of spot-welded transformation-induced plasticity (TRIP)-aided martensitic (TM) steel sheet was investigated. The tensile shear tests were carried out on a tensile testing machine using the spot-welded specimen which was spot-welded at the lapped portion of 30 mm×30 mm using specimen with dimensions of width of 30 mm and length of 170 mm at crosshead speeds of v=0.5 to 100 mm/min with and without hydrogen. The results were summarized as follows.\",\"PeriodicalId\":22340,\"journal\":{\"name\":\"Tetsu To Hagane-journal of The Iron and Steel Institute of Japan\",\"volume\":\"33 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.3000,\"publicationDate\":\"2023-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Tetsu To Hagane-journal of The Iron and Steel Institute of Japan\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2355/tetsutohagane.tetsu-2023-077\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Tetsu To Hagane-journal of The Iron and Steel Institute of Japan","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2355/tetsutohagane.tetsu-2023-077","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}

引用次数: 0

摘要

本文研究了氢对点焊变形诱导塑性(TRIP)辅助马氏体(TM)钢板抗拉剪切强度的影响。拉伸剪切试验在拉力试验机上进行，使用点焊试样，在30 mm×30 mm的搭接部分进行点焊，使用尺寸为30 mm，长度为170 mm的试样，十字头速度为v=0.5至100 mm/min，有氢和无氢。结果总结如下:

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Effect of Hydrogen on Tensile Shear Strength of Spot-Welded Ultrahigh-Strength TRIP-Aided Martensitic Steel Sheet

In this study, the effect of hydrogen on the tensile shear strength of spot-welded transformation-induced plasticity (TRIP)-aided martensitic (TM) steel sheet was investigated. The tensile shear tests were carried out on a tensile testing machine using the spot-welded specimen which was spot-welded at the lapped portion of 30 mm×30 mm using specimen with dimensions of width of 30 mm and length of 170 mm at crosshead speeds of v=0.5 to 100 mm/min with and without hydrogen. The results were summarized as follows.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Tetsu To Hagane-journal of The Iron and Steel Institute of Japan 工程技术-冶金工程

CiteScore

0.70

自引率

33.30%

发文量

审稿时长

6-12 weeks

期刊介绍： The journal ISIJ International first appeared in 1961 under the title Tetsu-to-Hagané Overseas. The title was changed in 1966 to Transactions of The Iron and Steel Institute of Japan and again in 1989 to the current ISIJ International. The journal provides an international medium for the publication of fundamental and technological aspects of the properties, structure, characterization and modeling, processing, fabrication, and environmental issues of iron and steel, along with related engineering materials. Classification I Fundamentals of High Temperature Processes II Ironmaking III Steelmaking IV Casting and Solidification V Instrumentation, Control, and System Engineering VI Chemical and Physical Analysis VII Forming Processing and Thermomechanical Treatment VIII Welding and Joining IX Surface Treatment and Corrosion X Transformations and Microstructures XI Mechanical Properties XII Physical Properties XIII New Materials and Processes XIV Social and Environmental Engineering.