超声辅助喷射电沉积制备Ni-TiN纳米复合镀层

IF 1.9 3区工程技术 Q3 ENGINEERING, MANUFACTURING

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Pub Date : 2023-09-27 DOI:10.1177/09544054231201919

Yuanlong Chen, Huigui Li, Jiachen Zhu, Cheng Fang, Zhongquan Li, Wei Jiang

{"title":"超声辅助喷射电沉积制备Ni-TiN纳米复合镀层","authors":"Yuanlong Chen, Huigui Li, Jiachen Zhu, Cheng Fang, Zhongquan Li, Wei Jiang","doi":"10.1177/09544054231201919","DOIUrl":null,"url":null,"abstract":"Ni-TiN composite coating is widely used as a protective coating due to its good mechanical properties and corrosion resistance. In this study, Ni-TiN nanocomposite coatings were prepared by ultrasonic-assisted jet electrodeposition. The growth mechanism and properties of the composite coatings in ultrasonic-assisted jet electrodeposition were studied. It was found that the surface morphology of the composite coating changed significantly with the increase in the concentration of nano TiN particles. Ultrasonic affects the selective orientation of the coating, and both lead to grain refinement. The addition of ultrasonic promotes the growth of (111) crystalline surfaces of the coating. Ultrasonic-assisted jet electrodeposition reduced tip discharge and nanoparticle agglomeration, and the surface quality, physical and chemical properties of the nanocomposite coating were significantly improved. The microhardness of the Ni-TiN composite coating was as high as 622.4 HV, the maximum adhesion was 27.2 N, and the corrosion resistance was the best with the corrosion current density at 1.898 μA cm −2 , when the amount of nano TiN was 10 g/L. This method will provide a reference for improving the growth uniformity of jet electrodeposition.","PeriodicalId":20663,"journal":{"name":"Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture","volume":"93 1","pages":"0"},"PeriodicalIF":1.9000,"publicationDate":"2023-09-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Fabrication of Ni-TiN nanocomposite coatings by ultrasonic assisted jet electrodeposition\",\"authors\":\"Yuanlong Chen, Huigui Li, Jiachen Zhu, Cheng Fang, Zhongquan Li, Wei Jiang\",\"doi\":\"10.1177/09544054231201919\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Ni-TiN composite coating is widely used as a protective coating due to its good mechanical properties and corrosion resistance. In this study, Ni-TiN nanocomposite coatings were prepared by ultrasonic-assisted jet electrodeposition. The growth mechanism and properties of the composite coatings in ultrasonic-assisted jet electrodeposition were studied. It was found that the surface morphology of the composite coating changed significantly with the increase in the concentration of nano TiN particles. Ultrasonic affects the selective orientation of the coating, and both lead to grain refinement. The addition of ultrasonic promotes the growth of (111) crystalline surfaces of the coating. Ultrasonic-assisted jet electrodeposition reduced tip discharge and nanoparticle agglomeration, and the surface quality, physical and chemical properties of the nanocomposite coating were significantly improved. The microhardness of the Ni-TiN composite coating was as high as 622.4 HV, the maximum adhesion was 27.2 N, and the corrosion resistance was the best with the corrosion current density at 1.898 μA cm −2 , when the amount of nano TiN was 10 g/L. This method will provide a reference for improving the growth uniformity of jet electrodeposition.\",\"PeriodicalId\":20663,\"journal\":{\"name\":\"Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture\",\"volume\":\"93 1\",\"pages\":\"0\"},\"PeriodicalIF\":1.9000,\"publicationDate\":\"2023-09-27\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1177/09544054231201919\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, MANUFACTURING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1177/09544054231201919","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MANUFACTURING","Score":null,"Total":0}

引用次数: 0

摘要

Ni-TiN复合涂层由于具有良好的力学性能和耐腐蚀性，被广泛用作防护涂层。本研究采用超声辅助喷射电沉积法制备了Ni-TiN纳米复合镀层。研究了超声辅助射流电沉积复合涂层的生长机理和性能。结果表明，随着纳米TiN颗粒浓度的增加，复合镀层的表面形貌发生了显著变化。超声影响涂层的选择性取向，两者都导致晶粒细化。超声波的加入促进了涂层(111)晶体表面的生长。超声辅助射流电沉积减少了针尖放电和纳米颗粒团聚，显著提高了纳米复合涂层的表面质量和理化性能。当纳米TiN用量为10 g/L时，Ni-TiN复合镀层的显微硬度高达622.4 HV，最大附着力为27.2 N，腐蚀电流密度为1.898 μA cm−2时，镀层的耐蚀性最佳。该方法将为提高射流电沉积的生长均匀性提供参考。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Fabrication of Ni-TiN nanocomposite coatings by ultrasonic assisted jet electrodeposition

Ni-TiN composite coating is widely used as a protective coating due to its good mechanical properties and corrosion resistance. In this study, Ni-TiN nanocomposite coatings were prepared by ultrasonic-assisted jet electrodeposition. The growth mechanism and properties of the composite coatings in ultrasonic-assisted jet electrodeposition were studied. It was found that the surface morphology of the composite coating changed significantly with the increase in the concentration of nano TiN particles. Ultrasonic affects the selective orientation of the coating, and both lead to grain refinement. The addition of ultrasonic promotes the growth of (111) crystalline surfaces of the coating. Ultrasonic-assisted jet electrodeposition reduced tip discharge and nanoparticle agglomeration, and the surface quality, physical and chemical properties of the nanocomposite coating were significantly improved. The microhardness of the Ni-TiN composite coating was as high as 622.4 HV, the maximum adhesion was 27.2 N, and the corrosion resistance was the best with the corrosion current density at 1.898 μA cm −2 , when the amount of nano TiN was 10 g/L. This method will provide a reference for improving the growth uniformity of jet electrodeposition.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 工程技术-工程：机械

CiteScore

5.10

自引率

30.80%

发文量

167

审稿时长

5.1 months

期刊介绍： Manufacturing industries throughout the world are changing very rapidly. New concepts and methods are being developed and exploited to enable efficient and effective manufacturing. Existing manufacturing processes are being improved to meet the requirements of lean and agile manufacturing. The aim of the Journal of Engineering Manufacture is to provide a focus for these developments in engineering manufacture by publishing original papers and review papers covering technological and scientific research, developments and management implementation in manufacturing. This journal is also peer reviewed. Contributions are welcomed in the broad areas of manufacturing processes, manufacturing technology and factory automation, digital manufacturing, design and manufacturing systems including management relevant to engineering manufacture. Of particular interest at the present time would be papers concerned with digital manufacturing, metrology enabled manufacturing, smart factory, additive manufacturing and composites as well as specialist manufacturing fields like nanotechnology, sustainable & clean manufacturing and bio-manufacturing. Articles may be Research Papers, Reviews, Technical Notes, or Short Communications.