Experimental study on proppant-carrying migration and settlement of slickwater in narrow plate fractures based on PIV / PTV

Hydraulic fracturing is the primary method used for oilfield stimulation, and the migration and settlement pattern of proppant plays a crucial role in the formation of high conductivity propping fractures in the reservoir. This study summarizes two growth modes of sand dune: the ‘overall longitudinal growth’ mode and the ‘push growth along fracture length direction’ mode. To investigate these modes, a two-phase velocity test is conducted using PIV, and the exposure difference is utilized to separate the tracer and track the single-phase velocity. By analyzing the slickwater flow field and proppant velocity field, the micro-motion mechanism behind the two dune growth modes is quantitatively examined. The results indicate that mode 1 growth of the sand dune occurs when a pump with a large mesh number, high polymer viscosity, and large displacement is used. On the other hand, mode 2 growth is observed when a pump with a small mesh number, low polymer viscosity, and small displacement is employed. It is important to note that there is no clear boundary for the migration and sedimentation mode of proppant, as they can transition into each other under certain conditions. These modes only exist during specific stages of sand dune growth. In the case of the ‘backflow’ pattern, the settlement of proppant is primarily influenced by the vortex structure of slickwater. Conversely, in the ‘direct’ pattern, the proppant is propelled forward by the drag of the fluid and settles due to its own gravity. Once the proppant placement reaches equilibrium, the direction of proppant velocity follows a normal distribution within 0°. This approach establishes a connection between the overall placement of the sand dune and the microscopic movement of the proppant and slickwater. Optimizing construction parameters during fracturing construction can enhance the effectiveness of distal proppant placement in fractures.