An Experiment Investigation on an Inclined Solar Distiller with a Stepped-Corrugated Absorber and Evacuated Tubes

Every person should be able to access water since it is one of the most fundamental needs for maintaining life. The process, referred to as renewable energy-based desalination, is gaining more importance over other desalination methods since it looks to be a promising technology for low-cost desalination that can support sustainable growth. This is particularly important because energy consumption is much higher in other water purification processes. This paper describes the enhanced yield and competence through experiments performed on two different modified conditions in solar still. For experimentation, a 1m2 area of the basin is fabricated in which a stepped absorber is installed over which corrugated fins are attached. The G.I. sheet is used as a material to manufacture it. The vacuum tube of 55mm outer diameter, 45 mm inner diameter and 1800mm long is used. The experimentation is performed to evaluate the cumulative yield and competence in Case-1, i.e., the inclined solar still with corrugated fins and stepped absorber. In Case-2, the same configuration is combined with vacuum tubes. From experimentation, the cumulative yield obtained for Case:2 is 4.7 kg/m 2 per day, which is higher than that obtained for Case:1, i.e., 3.82 kg/m 2 per day. The solar efficiency was also determined to be 46.72% in Case-2 and 39.98% in Case-1. This indicates that the combined configuration of solar still with vacuum tubes produced 23.0% higher fresh output than the configuration without vacuum tubes. According to these findings, the functionality of the solar still has seen substantial development in Case-2. Overall, the results demonstrate that using vacuum tubes with inclined solar still having stepped absorber and corrugated fin configuration can significantly improve its productivity and efficiency .