Kingsley O. Iwuozor, Ebuka Chizitere Emenike, Joy Adeleke, Taiwo Temitayo Micheal, Samuel Ogunniyi, Adewale George Adeniyi
{"title":"利用间歇和半间歇生物质燃料反应器对LDPE和印楝叶生产的生物炭进行比较评估","authors":"Kingsley O. Iwuozor, Ebuka Chizitere Emenike, Joy Adeleke, Taiwo Temitayo Micheal, Samuel Ogunniyi, Adewale George Adeniyi","doi":"10.1080/17597269.2023.2281099","DOIUrl":null,"url":null,"abstract":"AbstractThis research aims to investigate and compare the properties of biochar derived from low-density polyethylene (LDPE) and neem leaves, utilizing both batch and semi-batch biomass fuel-based reactors for co-carbonization. While previous studies have primarily employed electrical-powered or biomass fuel-based batch reactors, this study introduces the innovative approach of utilizing a semi-batch reactor, marking a significant advancement in biochar production. The co-carbonization process lasted for ∼2 h in the batch-based system and nearly 3 h in the semi-batch system. The semi-batch system achieved higher temperature peaks in comparison to the batch-based system. In terms of biochar yield, the batch-based system generated a biochar yield of 30.35%, while the semi-batch system yielded 17.3%. Through BET analysis, it was determined that the biochar produced using the semi-batch reactor had a surface area of 227 m2/g and a pore diameter of 2.116 nm. Similarities and differences in functional groups among the biochar samples produced using the semi-batch and batch reactors were identified through FTIR analysis. By utilizing EDX spectroscopy, it was observed that the batch-based system contained seven elements, whereas the semi-batch-reacted sample had similar elements but lacked nitrogen, potassium, and magnesium. The semi-batch-reacted sample exhibited an increased carbon content, whereas the concentrations of other elements decreased when compared to the batch-reacted sample. The biochar samples can be applied in various applications, including water treatment, energy conversion, and storage. The findings of this study contribute to sustainable waste management practices, carbon sequestration efforts, and the development of innovative solutions for various industries.Keywords: Batch reactorcharacterizationenergy utilizationgasificationgreen chemistrysemi-batch reactor Author contributionsKingsley O. Iwuozor: conceptualization, data curation, formal analysis, investigation, methodology, validation, visualization, roles/writing—original draft, writing—review and editing. Ebuka Chizitere Emenike: conceptualization, data curation, formal analysis, investigation, methodology, validation, visualization, writing—review and editing. Joy Adeleke: conceptualization, data curation, formal analysis, investigation, methodology, validation, visualization, writing—review and editing. Taiwo Temitayo Micheal: validation, visualization, roles/writing—original draft, writing—review and editing. Ogunniyi Samuel: validation, visualization, roles/writing—original draft, writing—review and editing. Adewale George Adeniyi: conceptualization, data curation, formal analysis, investigation, methodology, supervision, validation, visualization, writing—review and editing.Disclosure statementNo potential conflict of interest was reported by the author(s).Additional informationFundingThis work received no external funding.","PeriodicalId":2,"journal":{"name":"ACS Applied Bio Materials","volume":null,"pages":null},"PeriodicalIF":4.6000,"publicationDate":"2023-11-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Comparative assessment of biochar produced from LDPE and neem leaves using batch and semi-batch biomass fuel-based reactors\",\"authors\":\"Kingsley O. Iwuozor, Ebuka Chizitere Emenike, Joy Adeleke, Taiwo Temitayo Micheal, Samuel Ogunniyi, Adewale George Adeniyi\",\"doi\":\"10.1080/17597269.2023.2281099\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"AbstractThis research aims to investigate and compare the properties of biochar derived from low-density polyethylene (LDPE) and neem leaves, utilizing both batch and semi-batch biomass fuel-based reactors for co-carbonization. While previous studies have primarily employed electrical-powered or biomass fuel-based batch reactors, this study introduces the innovative approach of utilizing a semi-batch reactor, marking a significant advancement in biochar production. The co-carbonization process lasted for ∼2 h in the batch-based system and nearly 3 h in the semi-batch system. The semi-batch system achieved higher temperature peaks in comparison to the batch-based system. In terms of biochar yield, the batch-based system generated a biochar yield of 30.35%, while the semi-batch system yielded 17.3%. Through BET analysis, it was determined that the biochar produced using the semi-batch reactor had a surface area of 227 m2/g and a pore diameter of 2.116 nm. Similarities and differences in functional groups among the biochar samples produced using the semi-batch and batch reactors were identified through FTIR analysis. By utilizing EDX spectroscopy, it was observed that the batch-based system contained seven elements, whereas the semi-batch-reacted sample had similar elements but lacked nitrogen, potassium, and magnesium. The semi-batch-reacted sample exhibited an increased carbon content, whereas the concentrations of other elements decreased when compared to the batch-reacted sample. The biochar samples can be applied in various applications, including water treatment, energy conversion, and storage. The findings of this study contribute to sustainable waste management practices, carbon sequestration efforts, and the development of innovative solutions for various industries.Keywords: Batch reactorcharacterizationenergy utilizationgasificationgreen chemistrysemi-batch reactor Author contributionsKingsley O. Iwuozor: conceptualization, data curation, formal analysis, investigation, methodology, validation, visualization, roles/writing—original draft, writing—review and editing. Ebuka Chizitere Emenike: conceptualization, data curation, formal analysis, investigation, methodology, validation, visualization, writing—review and editing. Joy Adeleke: conceptualization, data curation, formal analysis, investigation, methodology, validation, visualization, writing—review and editing. Taiwo Temitayo Micheal: validation, visualization, roles/writing—original draft, writing—review and editing. Ogunniyi Samuel: validation, visualization, roles/writing—original draft, writing—review and editing. Adewale George Adeniyi: conceptualization, data curation, formal analysis, investigation, methodology, supervision, validation, visualization, writing—review and editing.Disclosure statementNo potential conflict of interest was reported by the author(s).Additional informationFundingThis work received no external funding.\",\"PeriodicalId\":2,\"journal\":{\"name\":\"ACS Applied Bio Materials\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.6000,\"publicationDate\":\"2023-11-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"ACS Applied Bio Materials\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1080/17597269.2023.2281099\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, BIOMATERIALS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"ACS Applied Bio Materials","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1080/17597269.2023.2281099","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, BIOMATERIALS","Score":null,"Total":0}
Comparative assessment of biochar produced from LDPE and neem leaves using batch and semi-batch biomass fuel-based reactors
AbstractThis research aims to investigate and compare the properties of biochar derived from low-density polyethylene (LDPE) and neem leaves, utilizing both batch and semi-batch biomass fuel-based reactors for co-carbonization. While previous studies have primarily employed electrical-powered or biomass fuel-based batch reactors, this study introduces the innovative approach of utilizing a semi-batch reactor, marking a significant advancement in biochar production. The co-carbonization process lasted for ∼2 h in the batch-based system and nearly 3 h in the semi-batch system. The semi-batch system achieved higher temperature peaks in comparison to the batch-based system. In terms of biochar yield, the batch-based system generated a biochar yield of 30.35%, while the semi-batch system yielded 17.3%. Through BET analysis, it was determined that the biochar produced using the semi-batch reactor had a surface area of 227 m2/g and a pore diameter of 2.116 nm. Similarities and differences in functional groups among the biochar samples produced using the semi-batch and batch reactors were identified through FTIR analysis. By utilizing EDX spectroscopy, it was observed that the batch-based system contained seven elements, whereas the semi-batch-reacted sample had similar elements but lacked nitrogen, potassium, and magnesium. The semi-batch-reacted sample exhibited an increased carbon content, whereas the concentrations of other elements decreased when compared to the batch-reacted sample. The biochar samples can be applied in various applications, including water treatment, energy conversion, and storage. The findings of this study contribute to sustainable waste management practices, carbon sequestration efforts, and the development of innovative solutions for various industries.Keywords: Batch reactorcharacterizationenergy utilizationgasificationgreen chemistrysemi-batch reactor Author contributionsKingsley O. Iwuozor: conceptualization, data curation, formal analysis, investigation, methodology, validation, visualization, roles/writing—original draft, writing—review and editing. Ebuka Chizitere Emenike: conceptualization, data curation, formal analysis, investigation, methodology, validation, visualization, writing—review and editing. Joy Adeleke: conceptualization, data curation, formal analysis, investigation, methodology, validation, visualization, writing—review and editing. Taiwo Temitayo Micheal: validation, visualization, roles/writing—original draft, writing—review and editing. Ogunniyi Samuel: validation, visualization, roles/writing—original draft, writing—review and editing. Adewale George Adeniyi: conceptualization, data curation, formal analysis, investigation, methodology, supervision, validation, visualization, writing—review and editing.Disclosure statementNo potential conflict of interest was reported by the author(s).Additional informationFundingThis work received no external funding.