PROGRAM FOR DETERMINING THE INFORMATIVE PARAMETERS OF SURFACE ELECTROMYOGRAPHIC SIGNALS

The article analyzes and calculates informative parameters of surface electromyographic signals (sEMS), which can be used to control biotechnical systems, as well as to diagnose the state of the musculoskeletal system. The analysis parameters in the time and frequency-time domains of the signal are considered. A program has been developed for calculating the informative indicators of the signal in the indicated areas. The program is implemented in the LabVIEW environment. To analyze the sEMG signal in the time domain, using the developed program, such indicators as Integral EMG, Average amplitude change, Wavelength, Simple quadratic integral, Absolute value of the 3rd time moment, and others were calculated; and to describe the signal spectrum by methods of time-frequency analysis, the average frequency of the spectrum (mean power frequency-MPF), the median frequency of the spectrum (median Frequency-MF), root mean square (RMS), power density spectrum (PDS), half width - the width of the spectrum at half maximum amplitude (HW). To test the program, files of real sEMQ signals were used. The calculated parameters of the sEMG analysis in the time and frequency-time domains make it possible to non-invasively and objectively assess the state of the musculoskeletal system. Keywords: Surface electromyographic signals, biotechnical systems, time-frequency analysis, Labvıew software.