Current-limiting droop controller with fault-ride-through capability for grid-tied inverters

In this paper, the recently proposed current-limiting droop (CLD) controller for grid-connected inverters is enhanced in order to comply with the Fault-Ride-Through (FRT) requirements set by the Grid Code under grid voltage sags. The proposed version of the CLD extends the operation of the original CLD by fully utilizing the power capacity of the inverter under grid faults. It is analytically proven that during a grid fault, the inverter current increases but never violates a given maximum value. Based on this property, an FRT algorithm is proposed and embedded into the proposed control design to support the voltage of the grid. In contrast to the existing FRT algorithms that change the desired values of both the real and reactive power, the proposed method maximizes only the reactive power to support the grid voltage and the real power automatically drops due to the inherent current-limiting property. Extensive simulations are presented to compare the proposed control approach with the original CLD under a faulty grid.