Synthetic Aperture Radar and Optical Sensor Techniques Using Google Earth Engine For Flood Monitoring and Damage Assessment – A Case Study of Mumbwa District, Zambia

Radar and Optical based satellite sensors were used in the study of the Mumbwa flood of December 2020. The Synthetic Aperture Radar (SAR) based Sentinel-1B was processed in Google Earth Engine (GEE) and utilized to generate an image mosaic from December 2020 to May 2021 to delineate flood extent. A local water histogram threshold change detection approach by image ratio was utilized to determine the flood extent with an intensity value of 1.26 dB as it fitted the study area uniquely as opposed to the global value of 1.25 dB. After extracting the initial flood water extent, it was necessary to filter out regions which inundated during the flood period. This was carried out using the following datasets and parameters: The HydroSHEDS Digital Elevation Model (DEM) was used to filter out regions with a slope value of greater than 7% and the Global Surface Water Layer was used to clip out regions with existing permanent surface water. Once the flooded areas were identified, the Optical based Sentinel-2 was used in the production of a Land Use Land Cover (LULC) Map for August 2020 in order to superimpose the flooded areas with existing land features over the study area. The map also under went pre and post processing in GEE using the Random Forest Classification Algorithm that achieved an Overall Accuracy and Kappa Coefficient of 0.957 and 0.91519 respectively. Thereafter the flood analysis and damage assessment were carried out. The quantitative damages to Landcover were found to be: Wetland 6,338.97 Ha (33.27%), Shrubland 5,117.75 Ha (26.89%), Biochar Soil 3,660.47 Ha (19.21%), Trees 3,466.37 Ha (18.19%), Bare soil 273.47 Ha (1.44%), Crop Fields 190.69 Ha (1%) and Built-Up 4.13 Ha (0.02%). Therefore the use of SAR by local histogram threshold approach with Optical datasets for LULC map production proved successful in the study of flood damage.