MBAN应用中可穿戴贴片天线阵列的设计与分析

D. Rano, M. Hashmi
{"title":"MBAN应用中可穿戴贴片天线阵列的设计与分析","authors":"D. Rano, M. Hashmi","doi":"10.1109/NCC.2016.7561201","DOIUrl":null,"url":null,"abstract":"Design idea of wearable rectangular patch antenna and its array for MBAN (2.36 - 2.4 GHz) applications are proposed in this paper. Microstrip line with quarter wave transformer is used for feeding purpose. Polyamide lossy (Nylon-6) is used as dielectric substrate whereas the conductive parts i.e. patch and ground plane consists of nickel - copper - nickel coating on the textile substrate. The presence of highly conductive coating on substrate (i.e., surface resistance of 0.1 ohms/m2) aids in the reduction of losses. Five layer model consisting of bottom textile, air gap, skin, fat and bone is considered here. Since the wearable antennas are body worn devices effect of body curvature is also considered by conforming the antennas on cylindrical surface.","PeriodicalId":279637,"journal":{"name":"2016 Twenty Second National Conference on Communication (NCC)","volume":"82 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2016-03-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"16","resultStr":"{\"title\":\"Design and analysis of wearable patch antenna array for MBAN applications\",\"authors\":\"D. Rano, M. Hashmi\",\"doi\":\"10.1109/NCC.2016.7561201\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Design idea of wearable rectangular patch antenna and its array for MBAN (2.36 - 2.4 GHz) applications are proposed in this paper. Microstrip line with quarter wave transformer is used for feeding purpose. Polyamide lossy (Nylon-6) is used as dielectric substrate whereas the conductive parts i.e. patch and ground plane consists of nickel - copper - nickel coating on the textile substrate. The presence of highly conductive coating on substrate (i.e., surface resistance of 0.1 ohms/m2) aids in the reduction of losses. Five layer model consisting of bottom textile, air gap, skin, fat and bone is considered here. Since the wearable antennas are body worn devices effect of body curvature is also considered by conforming the antennas on cylindrical surface.\",\"PeriodicalId\":279637,\"journal\":{\"name\":\"2016 Twenty Second National Conference on Communication (NCC)\",\"volume\":\"82 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2016-03-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"16\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2016 Twenty Second National Conference on Communication (NCC)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/NCC.2016.7561201\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2016 Twenty Second National Conference on Communication (NCC)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/NCC.2016.7561201","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 16

摘要

提出了适用于MBAN (2.36 ~ 2.4 GHz)应用的可穿戴矩形贴片天线及其阵列的设计思路。带四分之一波变压器的微带线用于馈电。聚酰胺损耗(尼龙-6)用作介质衬底,而导电部分(即贴片和接地面)由纺织衬底上的镍-铜-镍涂层组成。在基材上的高导电性涂层(即,表面电阻为0.1欧姆/平方米)有助于减少损耗。本文考虑了由底层织物、气隙、皮肤、脂肪和骨骼组成的五层模型。由于可穿戴天线是人体穿戴设备,因此考虑了人体曲率的影响,将天线固定在柱面上。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Design and analysis of wearable patch antenna array for MBAN applications
Design idea of wearable rectangular patch antenna and its array for MBAN (2.36 - 2.4 GHz) applications are proposed in this paper. Microstrip line with quarter wave transformer is used for feeding purpose. Polyamide lossy (Nylon-6) is used as dielectric substrate whereas the conductive parts i.e. patch and ground plane consists of nickel - copper - nickel coating on the textile substrate. The presence of highly conductive coating on substrate (i.e., surface resistance of 0.1 ohms/m2) aids in the reduction of losses. Five layer model consisting of bottom textile, air gap, skin, fat and bone is considered here. Since the wearable antennas are body worn devices effect of body curvature is also considered by conforming the antennas on cylindrical surface.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信