小型简易印刷电路板雕刻机的设计

Proceedings of 5th International Conference on Vehicle, Mechanical and Electrical Engineering Pub Date : 1900-01-01 DOI:10.5220/0008385402880292

Kai Zheng, J. Nan

{"title":"小型简易印刷电路板雕刻机的设计","authors":"Kai Zheng, J. Nan","doi":"10.5220/0008385402880292","DOIUrl":null,"url":null,"abstract":"What this design has developed is kind of simple PCB CNC engraving machine for personal and school laboratories (hereinafter referred to as: engraving machine). According to the requirement of system design, the design scheme of main motion and feed motion of engraving machine is fully demonstrated. The system consists of mechanical part and control part. The mechanical part adopts vertical structure and calculates the design parameters according to the working requirements of the system. The control part takes PC as the control core to design the control hardware module. The open-loop servo system with simple structure, stable operation, easy control and convenient maintenance is adopted.","PeriodicalId":186406,"journal":{"name":"Proceedings of 5th International Conference on Vehicle, Mechanical and Electrical Engineering","volume":"23 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Design of a Small-sized Simple Printed Circuit Board Engraving Machine\",\"authors\":\"Kai Zheng, J. Nan\",\"doi\":\"10.5220/0008385402880292\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"What this design has developed is kind of simple PCB CNC engraving machine for personal and school laboratories (hereinafter referred to as: engraving machine). According to the requirement of system design, the design scheme of main motion and feed motion of engraving machine is fully demonstrated. The system consists of mechanical part and control part. The mechanical part adopts vertical structure and calculates the design parameters according to the working requirements of the system. The control part takes PC as the control core to design the control hardware module. The open-loop servo system with simple structure, stable operation, easy control and convenient maintenance is adopted.\",\"PeriodicalId\":186406,\"journal\":{\"name\":\"Proceedings of 5th International Conference on Vehicle, Mechanical and Electrical Engineering\",\"volume\":\"23 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1900-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Proceedings of 5th International Conference on Vehicle, Mechanical and Electrical Engineering\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.5220/0008385402880292\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of 5th International Conference on Vehicle, Mechanical and Electrical Engineering","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.5220/0008385402880292","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

本设计开发的是一种简单的PCB数控雕刻机，用于个人和学校实验室(以下简称:雕刻机)。根据系统设计的要求，充分论证了雕刻机主运动和进给运动的设计方案。该系统由机械部分和控制部分组成。机械部分采用垂直结构，根据系统的工作要求计算设计参数。控制部分以PC机为控制核心，设计控制硬件模块。采用结构简单、运行稳定、控制简单、维修方便的开环伺服系统。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Design of a Small-sized Simple Printed Circuit Board Engraving Machine

What this design has developed is kind of simple PCB CNC engraving machine for personal and school laboratories (hereinafter referred to as: engraving machine). According to the requirement of system design, the design scheme of main motion and feed motion of engraving machine is fully demonstrated. The system consists of mechanical part and control part. The mechanical part adopts vertical structure and calculates the design parameters according to the working requirements of the system. The control part takes PC as the control core to design the control hardware module. The open-loop servo system with simple structure, stable operation, easy control and convenient maintenance is adopted.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Proceedings of 5th International Conference on Vehicle, Mechanical and Electrical Engineering

自引率

0.00%

发文量