iQPrep试剂盒:一种用于免疫诊断的毫流体测试试剂盒

Ramdayalan Kumarasami, J. Joseph, Jayaraman Kiruthi Vasan, S. Pandidurai, Prabhakar Sithambaram, M. Sivaprakasam
{"title":"iQPrep试剂盒:一种用于免疫诊断的毫流体测试试剂盒","authors":"Ramdayalan Kumarasami, J. Joseph, Jayaraman Kiruthi Vasan, S. Pandidurai, Prabhakar Sithambaram, M. Sivaprakasam","doi":"10.1109/MeMeA49120.2020.9137129","DOIUrl":null,"url":null,"abstract":"Conventional laboratory-based diagnostics require highly sophisticated equipment to multiplex and analyze samples at scale. Recent advances in Point-of-care diagnostic devices have enabled rapid and accurate diagnosis on site leading to timely confirmation and effective management of individual and community health. A key enabler of such advancements is the simple to use lateral flow immunoassays that provide quick and accurate qualitative and semi-quantitative results. Typical lateral flow tests have sample preparation steps before deposition on the test membrane. Sample preparation by manual means is time-consuming and error-prone. The iQPrep Kit handles sample preparation using milli-fluidic channels and utilizes lateral flow test kits to quantitatively evaluate key immunological markers like HbA1c, Vitamin D, and TSH. The test kit design enables quick prototyping using 3D printing and can easily be mass-produced using injection molding. The functional performance of the kit was verified using a pneumatic system. The average fluid loss during fluid transport is around 7 µl using the pneumatic system. Repeatability tests were done to check if comparable amounts of fluid were transported for the same operating conditions. The coefficient of variation for the above test ranged between 2.1 % and 5.6 %. A quadratic relation was obtained between the fluid flow rate and the syringe air pressure for the multi-material valves within the kit. The quadratic fit had R2 values of 0.996 and 0.977 for the multichannel and dispensing valves, respectively. The multichannel and dispensing valves can withstand syringe air pressure of up to 2.1 kPa and 1.9 kPa, respectively, during fluid flow, before leaking. When the valves are closed, they can withstand a pressure of 1.3 kPa for 2 sec. An HbA1c test was done by manual sample preparation and using the kit. The results were similar in both cases establishing the accurate sample preparation capability of the kit. The iQPrep Kit is hence, a versatile test platform for immunodiagnostics.","PeriodicalId":152478,"journal":{"name":"2020 IEEE International Symposium on Medical Measurements and Applications (MeMeA)","volume":"3 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2020-06-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"iQPrep Kit: A milli-fluidic test kit for immunodiagnostics\",\"authors\":\"Ramdayalan Kumarasami, J. Joseph, Jayaraman Kiruthi Vasan, S. Pandidurai, Prabhakar Sithambaram, M. Sivaprakasam\",\"doi\":\"10.1109/MeMeA49120.2020.9137129\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Conventional laboratory-based diagnostics require highly sophisticated equipment to multiplex and analyze samples at scale. Recent advances in Point-of-care diagnostic devices have enabled rapid and accurate diagnosis on site leading to timely confirmation and effective management of individual and community health. A key enabler of such advancements is the simple to use lateral flow immunoassays that provide quick and accurate qualitative and semi-quantitative results. Typical lateral flow tests have sample preparation steps before deposition on the test membrane. Sample preparation by manual means is time-consuming and error-prone. The iQPrep Kit handles sample preparation using milli-fluidic channels and utilizes lateral flow test kits to quantitatively evaluate key immunological markers like HbA1c, Vitamin D, and TSH. The test kit design enables quick prototyping using 3D printing and can easily be mass-produced using injection molding. The functional performance of the kit was verified using a pneumatic system. The average fluid loss during fluid transport is around 7 µl using the pneumatic system. Repeatability tests were done to check if comparable amounts of fluid were transported for the same operating conditions. The coefficient of variation for the above test ranged between 2.1 % and 5.6 %. A quadratic relation was obtained between the fluid flow rate and the syringe air pressure for the multi-material valves within the kit. The quadratic fit had R2 values of 0.996 and 0.977 for the multichannel and dispensing valves, respectively. The multichannel and dispensing valves can withstand syringe air pressure of up to 2.1 kPa and 1.9 kPa, respectively, during fluid flow, before leaking. When the valves are closed, they can withstand a pressure of 1.3 kPa for 2 sec. An HbA1c test was done by manual sample preparation and using the kit. The results were similar in both cases establishing the accurate sample preparation capability of the kit. The iQPrep Kit is hence, a versatile test platform for immunodiagnostics.\",\"PeriodicalId\":152478,\"journal\":{\"name\":\"2020 IEEE International Symposium on Medical Measurements and Applications (MeMeA)\",\"volume\":\"3 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-06-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2020 IEEE International Symposium on Medical Measurements and Applications (MeMeA)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/MeMeA49120.2020.9137129\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2020 IEEE International Symposium on Medical Measurements and Applications (MeMeA)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/MeMeA49120.2020.9137129","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 2

摘要

传统的以实验室为基础的诊断需要高度复杂的设备来进行多路复用和大规模分析样品。医疗点诊断设备的最新进展使现场快速准确诊断成为可能,从而及时确认和有效管理个人和社区健康。这种进步的一个关键促成因素是使用简单的横向流动免疫测定,可以提供快速准确的定性和半定量结果。典型的横向流动试验在沉积在测试膜上之前有样品制备步骤。手工制备样品既费时又容易出错。iQPrep试剂盒使用微流体通道处理样品制备,并利用横向流动测试试剂盒定量评估关键免疫标志物,如HbA1c,维生素D和TSH。测试套件的设计可以使用3D打印快速制作原型,并且可以轻松地使用注射成型进行批量生产。使用气动系统验证了该套件的功能性能。使用气动系统时,流体输送过程中的平均失液量约为7µl。进行了重复性测试,以检查在相同的操作条件下是否输送了相当数量的流体。上述试验的变异系数在2.1% ~ 5.6%之间。对于试剂盒内的多材料阀,流体流速与注射器气压之间呈二次关系。多通道和配药阀的二次拟合R2分别为0.996和0.977。在流体流动过程中,多通道和点胶阀分别可承受高达2.1 kPa和1.9 kPa的注射器气压,直至泄漏。当阀门关闭时,它们可以承受1.3 kPa的压力2秒。通过手动样品制备和使用试剂盒进行HbA1c测试。两种情况下的结果相似,建立了试剂盒准确的样品制备能力。因此,iQPrep试剂盒是一个多功能的免疫诊断测试平台。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
iQPrep Kit: A milli-fluidic test kit for immunodiagnostics
Conventional laboratory-based diagnostics require highly sophisticated equipment to multiplex and analyze samples at scale. Recent advances in Point-of-care diagnostic devices have enabled rapid and accurate diagnosis on site leading to timely confirmation and effective management of individual and community health. A key enabler of such advancements is the simple to use lateral flow immunoassays that provide quick and accurate qualitative and semi-quantitative results. Typical lateral flow tests have sample preparation steps before deposition on the test membrane. Sample preparation by manual means is time-consuming and error-prone. The iQPrep Kit handles sample preparation using milli-fluidic channels and utilizes lateral flow test kits to quantitatively evaluate key immunological markers like HbA1c, Vitamin D, and TSH. The test kit design enables quick prototyping using 3D printing and can easily be mass-produced using injection molding. The functional performance of the kit was verified using a pneumatic system. The average fluid loss during fluid transport is around 7 µl using the pneumatic system. Repeatability tests were done to check if comparable amounts of fluid were transported for the same operating conditions. The coefficient of variation for the above test ranged between 2.1 % and 5.6 %. A quadratic relation was obtained between the fluid flow rate and the syringe air pressure for the multi-material valves within the kit. The quadratic fit had R2 values of 0.996 and 0.977 for the multichannel and dispensing valves, respectively. The multichannel and dispensing valves can withstand syringe air pressure of up to 2.1 kPa and 1.9 kPa, respectively, during fluid flow, before leaking. When the valves are closed, they can withstand a pressure of 1.3 kPa for 2 sec. An HbA1c test was done by manual sample preparation and using the kit. The results were similar in both cases establishing the accurate sample preparation capability of the kit. The iQPrep Kit is hence, a versatile test platform for immunodiagnostics.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信