{"title":"平面型SOFC圆盘通道内的旋流特性","authors":"K. Tsunoda, T. Kouda","doi":"10.1299/KIKAIB.77.76","DOIUrl":null,"url":null,"abstract":"Swirling flow behavior between two parallel disk shape plates was experimentally investigated with the aid of a particle image velocimetry (PIV). The experiment was performed at low Reynolds numbers (Re < 100) to simulate the practical operation in a disk shape planar-type solid oxide fuel cell (SOFC). In the channel installed radial-type current collectors, unfavorable flow deceleration occurred toward downstream direction. Since this result suggested the necessity of improvement of flow uniformity, we designed a new channel with circle involute shape current collectors. In the new involute-type channel, a swirling flow was generated and its velocity was kept at nearly constant value toward the channel exit. This trend was observed regardless of flow rates, and hence flow uniformity was achieved over the wide range of Reynolds numbers. This is because a flow passage consisting of two adjacent involute shape current collectors functions as a constat-area channel due to the geometrical property of the circle involute. Furthermore, an estimation of a fluid motion in the involute-type channel was carried out by using steady state Euler's equation of motion. We confirmed that the velocity component in the flow direction was dominant compared with that in the other direction and played primary role to maintain a swirling motion through the centripetal acceleration term.","PeriodicalId":331123,"journal":{"name":"Transactions of the Japan Society of Mechanical Engineers. B","volume":null,"pages":null},"PeriodicalIF":0.0000,"publicationDate":"2011-12-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Swirling flow behavior in a disk channel for planar-type SOFC\",\"authors\":\"K. Tsunoda, T. Kouda\",\"doi\":\"10.1299/KIKAIB.77.76\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Swirling flow behavior between two parallel disk shape plates was experimentally investigated with the aid of a particle image velocimetry (PIV). The experiment was performed at low Reynolds numbers (Re < 100) to simulate the practical operation in a disk shape planar-type solid oxide fuel cell (SOFC). In the channel installed radial-type current collectors, unfavorable flow deceleration occurred toward downstream direction. Since this result suggested the necessity of improvement of flow uniformity, we designed a new channel with circle involute shape current collectors. In the new involute-type channel, a swirling flow was generated and its velocity was kept at nearly constant value toward the channel exit. This trend was observed regardless of flow rates, and hence flow uniformity was achieved over the wide range of Reynolds numbers. This is because a flow passage consisting of two adjacent involute shape current collectors functions as a constat-area channel due to the geometrical property of the circle involute. Furthermore, an estimation of a fluid motion in the involute-type channel was carried out by using steady state Euler's equation of motion. We confirmed that the velocity component in the flow direction was dominant compared with that in the other direction and played primary role to maintain a swirling motion through the centripetal acceleration term.\",\"PeriodicalId\":331123,\"journal\":{\"name\":\"Transactions of the Japan Society of Mechanical Engineers. B\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2011-12-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Transactions of the Japan Society of Mechanical Engineers. B\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1299/KIKAIB.77.76\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Transactions of the Japan Society of Mechanical Engineers. B","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1299/KIKAIB.77.76","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Swirling flow behavior in a disk channel for planar-type SOFC
Swirling flow behavior between two parallel disk shape plates was experimentally investigated with the aid of a particle image velocimetry (PIV). The experiment was performed at low Reynolds numbers (Re < 100) to simulate the practical operation in a disk shape planar-type solid oxide fuel cell (SOFC). In the channel installed radial-type current collectors, unfavorable flow deceleration occurred toward downstream direction. Since this result suggested the necessity of improvement of flow uniformity, we designed a new channel with circle involute shape current collectors. In the new involute-type channel, a swirling flow was generated and its velocity was kept at nearly constant value toward the channel exit. This trend was observed regardless of flow rates, and hence flow uniformity was achieved over the wide range of Reynolds numbers. This is because a flow passage consisting of two adjacent involute shape current collectors functions as a constat-area channel due to the geometrical property of the circle involute. Furthermore, an estimation of a fluid motion in the involute-type channel was carried out by using steady state Euler's equation of motion. We confirmed that the velocity component in the flow direction was dominant compared with that in the other direction and played primary role to maintain a swirling motion through the centripetal acceleration term.