{"title":"SLM法制备Cu7.2Ni1.8Si1Cr铜合金的导热系数及薄壁结构制备能力","authors":"J. Mašek, D. Koutný, R. Popela","doi":"10.13164/CONF.READ.2018.12","DOIUrl":null,"url":null,"abstract":"Three parts a disk with inner holes and two cylinders with thin-wall web of 0.325 mm and 1.625 mm were produced by Selective laser melting technology from a copper alloy Cu7.2Ni1.8Si1Cr powder. Based on the previous experience with this copper material, the fabrication was successfully processed with up to 5 % dimensional accuracy according to CAD model. The fabricated samples were tested in an experimental thermo-vacuum chamber to reveal the material thermal conductivity since no data are freely available. Based on the reference samples testing, the evaluation process was upgraded by considering a heat transfer by radiation. The measured thermal conductivity of the SLM produced alloy Cu7.2Ni1.8Si1Cr was 3.4 times lower than the value of a bulk material AMPCOLOY 944 with a similar chemical composition.","PeriodicalId":340623,"journal":{"name":"13th Research and Education in Aircraft Design: Conference proceedings","volume":"23 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":"{\"title\":\"Thermal conductivity of Cu7.2Ni1.8Si1Cr copper alloy produced via SLM and ability of thin-wall structure fabrication\",\"authors\":\"J. Mašek, D. Koutný, R. Popela\",\"doi\":\"10.13164/CONF.READ.2018.12\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Three parts a disk with inner holes and two cylinders with thin-wall web of 0.325 mm and 1.625 mm were produced by Selective laser melting technology from a copper alloy Cu7.2Ni1.8Si1Cr powder. Based on the previous experience with this copper material, the fabrication was successfully processed with up to 5 % dimensional accuracy according to CAD model. The fabricated samples were tested in an experimental thermo-vacuum chamber to reveal the material thermal conductivity since no data are freely available. Based on the reference samples testing, the evaluation process was upgraded by considering a heat transfer by radiation. The measured thermal conductivity of the SLM produced alloy Cu7.2Ni1.8Si1Cr was 3.4 times lower than the value of a bulk material AMPCOLOY 944 with a similar chemical composition.\",\"PeriodicalId\":340623,\"journal\":{\"name\":\"13th Research and Education in Aircraft Design: Conference proceedings\",\"volume\":\"23 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"1900-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"3\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"13th Research and Education in Aircraft Design: Conference proceedings\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.13164/CONF.READ.2018.12\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"13th Research and Education in Aircraft Design: Conference proceedings","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.13164/CONF.READ.2018.12","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Thermal conductivity of Cu7.2Ni1.8Si1Cr copper alloy produced via SLM and ability of thin-wall structure fabrication
Three parts a disk with inner holes and two cylinders with thin-wall web of 0.325 mm and 1.625 mm were produced by Selective laser melting technology from a copper alloy Cu7.2Ni1.8Si1Cr powder. Based on the previous experience with this copper material, the fabrication was successfully processed with up to 5 % dimensional accuracy according to CAD model. The fabricated samples were tested in an experimental thermo-vacuum chamber to reveal the material thermal conductivity since no data are freely available. Based on the reference samples testing, the evaluation process was upgraded by considering a heat transfer by radiation. The measured thermal conductivity of the SLM produced alloy Cu7.2Ni1.8Si1Cr was 3.4 times lower than the value of a bulk material AMPCOLOY 944 with a similar chemical composition.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
