V. V. Mylnikov, A. I. Pronin, S. Veselov, D. Valko
{"title":"车削淬硬钢坯料时陶瓷板切削耐久性的对比研究结果","authors":"V. V. Mylnikov, A. I. Pronin, S. Veselov, D. Valko","doi":"10.14489/glc.2022.01.pp.015-020","DOIUrl":null,"url":null,"abstract":"The paper presents the results of a study on the durability of cutting ceramics: a replaceable polyhedral plate developed at NSTU and cutting ceramics WOK-60 when processing hardened steel blanks made of 40X (45HRC) steel. As a result of the tests carried out, it was found that with the use of cutting modes developed at KNAU, the durability of SMP from cutting ceramics created at NSTU is more than 1.7 times higher than the performance of plates based on the WOK-60 material. At the same time, the roughness of the treated surface of the work piece was Ra = 0.35 ? 0.05 microns when using SMP from the developed ceramics Ra = 0.55 ? 0.05 microns when using WOK-60 plates. The stages of destruction of cutting ceramic plates are revealed, taking into account the hierarchy of structural scales.","PeriodicalId":445802,"journal":{"name":"Steklo i Keramika","volume":"40 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"RESULTS OF COMPARATIVE STUDIES ON THE DURABILITY OF CUTTING CERAMIC PLATES WHEN TURNING HARDENED STEEL BLANKS\",\"authors\":\"V. V. Mylnikov, A. I. Pronin, S. Veselov, D. Valko\",\"doi\":\"10.14489/glc.2022.01.pp.015-020\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The paper presents the results of a study on the durability of cutting ceramics: a replaceable polyhedral plate developed at NSTU and cutting ceramics WOK-60 when processing hardened steel blanks made of 40X (45HRC) steel. As a result of the tests carried out, it was found that with the use of cutting modes developed at KNAU, the durability of SMP from cutting ceramics created at NSTU is more than 1.7 times higher than the performance of plates based on the WOK-60 material. At the same time, the roughness of the treated surface of the work piece was Ra = 0.35 ? 0.05 microns when using SMP from the developed ceramics Ra = 0.55 ? 0.05 microns when using WOK-60 plates. The stages of destruction of cutting ceramic plates are revealed, taking into account the hierarchy of structural scales.\",\"PeriodicalId\":445802,\"journal\":{\"name\":\"Steklo i Keramika\",\"volume\":\"40 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2022-01-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Steklo i Keramika\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.14489/glc.2022.01.pp.015-020\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Steklo i Keramika","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.14489/glc.2022.01.pp.015-020","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
RESULTS OF COMPARATIVE STUDIES ON THE DURABILITY OF CUTTING CERAMIC PLATES WHEN TURNING HARDENED STEEL BLANKS
The paper presents the results of a study on the durability of cutting ceramics: a replaceable polyhedral plate developed at NSTU and cutting ceramics WOK-60 when processing hardened steel blanks made of 40X (45HRC) steel. As a result of the tests carried out, it was found that with the use of cutting modes developed at KNAU, the durability of SMP from cutting ceramics created at NSTU is more than 1.7 times higher than the performance of plates based on the WOK-60 material. At the same time, the roughness of the treated surface of the work piece was Ra = 0.35 ? 0.05 microns when using SMP from the developed ceramics Ra = 0.55 ? 0.05 microns when using WOK-60 plates. The stages of destruction of cutting ceramic plates are revealed, taking into account the hierarchy of structural scales.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
