带数字控制器的电动汽车DC-DC变换器的设计与实现

2013 IEEE Vehicle Power and Propulsion Conference (VPPC) Pub Date : 2013-11-21 DOI:10.1109/VPPC.2013.6671672

Seung-mo Kim, Byung-gi Kwon, M. Kim, Yong-hyo Kwon, Pyosoo Kim, Duk-hee Lee, C. Choi

{"title":"带数字控制器的电动汽车DC-DC变换器的设计与实现","authors":"Seung-mo Kim, Byung-gi Kwon, M. Kim, Yong-hyo Kwon, Pyosoo Kim, Duk-hee Lee, C. Choi","doi":"10.1109/VPPC.2013.6671672","DOIUrl":null,"url":null,"abstract":"This paper presents a design and implementation of DC-DC Converter with sliding mode and PI control for Electric Vehicles. For Implementation, ZVS(Zero Voltage Switching) PSFB(Phase Shift Full Bridge) topology is adopted. In digital controller, PI Controller is adopt to output-voltage control, and Sliding Mode Controller is used to protection such as overcurrent/voltage of output in DC-DC Converter. A prototype of the proposed DC-DC Converter has been implemented and tested on a 13.7V of dc-output voltage, and 130A for max dc-output current. A Digital Controller by digital controller is discussed, and experimental results are presented.","PeriodicalId":119598,"journal":{"name":"2013 IEEE Vehicle Power and Propulsion Conference (VPPC)","volume":"1 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2013-11-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"4","resultStr":"{\"title\":\"Design and Implementation of DC-DC Converter with Digital Controller for Electric Vehicle\",\"authors\":\"Seung-mo Kim, Byung-gi Kwon, M. Kim, Yong-hyo Kwon, Pyosoo Kim, Duk-hee Lee, C. Choi\",\"doi\":\"10.1109/VPPC.2013.6671672\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper presents a design and implementation of DC-DC Converter with sliding mode and PI control for Electric Vehicles. For Implementation, ZVS(Zero Voltage Switching) PSFB(Phase Shift Full Bridge) topology is adopted. In digital controller, PI Controller is adopt to output-voltage control, and Sliding Mode Controller is used to protection such as overcurrent/voltage of output in DC-DC Converter. A prototype of the proposed DC-DC Converter has been implemented and tested on a 13.7V of dc-output voltage, and 130A for max dc-output current. A Digital Controller by digital controller is discussed, and experimental results are presented.\",\"PeriodicalId\":119598,\"journal\":{\"name\":\"2013 IEEE Vehicle Power and Propulsion Conference (VPPC)\",\"volume\":\"1 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2013-11-21\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"4\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2013 IEEE Vehicle Power and Propulsion Conference (VPPC)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/VPPC.2013.6671672\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2013 IEEE Vehicle Power and Propulsion Conference (VPPC)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/VPPC.2013.6671672","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 4

摘要

本文介绍了一种电动汽车用滑模PI控制DC-DC变换器的设计与实现。为实现，采用零电压开关(ZVS) PSFB(相移全桥)拓扑。数字控制器采用PI控制器对输出电压进行控制，采用滑模控制器对DC-DC变换器输出过流/电压等进行保护。所提出的DC-DC转换器的原型已经实现并在13.7V直流输出电压和130A最大直流输出电流下进行了测试。讨论了一种基于数字控制器的数字控制器，并给出了实验结果。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Design and Implementation of DC-DC Converter with Digital Controller for Electric Vehicle

This paper presents a design and implementation of DC-DC Converter with sliding mode and PI control for Electric Vehicles. For Implementation, ZVS(Zero Voltage Switching) PSFB(Phase Shift Full Bridge) topology is adopted. In digital controller, PI Controller is adopt to output-voltage control, and Sliding Mode Controller is used to protection such as overcurrent/voltage of output in DC-DC Converter. A prototype of the proposed DC-DC Converter has been implemented and tested on a 13.7V of dc-output voltage, and 130A for max dc-output current. A Digital Controller by digital controller is discussed, and experimental results are presented.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2013 IEEE Vehicle Power and Propulsion Conference (VPPC)

自引率

0.00%

发文量