采用Pi衰减器和超宽带放大器的超宽带局部放电检测器的设计

2017 International Seminar on Intelligent Technology and Its Applications (ISITIA) Pub Date : 2017-08-01 DOI:10.1109/ISITIA.2017.8124052

Dede Furqon, Rachmat Sannia Putra, U. Khayam

{"title":"采用Pi衰减器和超宽带放大器的超宽带局部放电检测器的设计","authors":"Dede Furqon, Rachmat Sannia Putra, U. Khayam","doi":"10.1109/ISITIA.2017.8124052","DOIUrl":null,"url":null,"abstract":"Detection of partial discharge (PD) in the frequency range ultrawide band (UWB) provides some benefits such as in a more accurate observation of the PD pulse shape and the PD frequency spectrum. One method to measure the PD signals in the UWB frequency range is by using the PD detecting impedance circuit. The 50 ohm detecting impedance is used as a coupling device to maximize power transfer of PD current. This paper design the matching impedance circuit comprising an impedance detector as attenuator and UWB amplifier as a signal amplifier. S-parameter characteristics of the circuit is simulated in software Advanced Design System (ADS) software. The PD detecting circuit is made and it is tested using Vector Network Analyzer (VNA) instruments. Then, the circuit is used to measure PD on the needle — plates electrode in the air.","PeriodicalId":308504,"journal":{"name":"2017 International Seminar on Intelligent Technology and Its Applications (ISITIA)","volume":"111 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2017-08-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"5","resultStr":"{\"title\":\"Design of ultrawide band partial discharge detector using Pi attenuator and ultrawide band amplifier\",\"authors\":\"Dede Furqon, Rachmat Sannia Putra, U. Khayam\",\"doi\":\"10.1109/ISITIA.2017.8124052\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Detection of partial discharge (PD) in the frequency range ultrawide band (UWB) provides some benefits such as in a more accurate observation of the PD pulse shape and the PD frequency spectrum. One method to measure the PD signals in the UWB frequency range is by using the PD detecting impedance circuit. The 50 ohm detecting impedance is used as a coupling device to maximize power transfer of PD current. This paper design the matching impedance circuit comprising an impedance detector as attenuator and UWB amplifier as a signal amplifier. S-parameter characteristics of the circuit is simulated in software Advanced Design System (ADS) software. The PD detecting circuit is made and it is tested using Vector Network Analyzer (VNA) instruments. Then, the circuit is used to measure PD on the needle — plates electrode in the air.\",\"PeriodicalId\":308504,\"journal\":{\"name\":\"2017 International Seminar on Intelligent Technology and Its Applications (ISITIA)\",\"volume\":\"111 1\",\"pages\":\"0\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2017-08-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"5\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2017 International Seminar on Intelligent Technology and Its Applications (ISITIA)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/ISITIA.2017.8124052\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2017 International Seminar on Intelligent Technology and Its Applications (ISITIA)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ISITIA.2017.8124052","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 5

摘要

在超宽带(UWB)频率范围内检测局部放电(PD)提供了一些好处，例如更准确地观察PD脉冲形状和PD频谱。在UWB频率范围内测量PD信号的一种方法是使用PD检测阻抗电路。采用50欧姆检测阻抗作为耦合装置，最大限度地实现PD电流的功率传输。本文设计了以阻抗检测器作为衰减器，以超宽带放大器作为信号放大器的匹配阻抗电路。利用先进设计系统(Advanced Design System, ADS)软件对电路s参数特性进行了仿真。制作了PD检测电路，并用矢量网络分析仪(VNA)对其进行了测试。然后，利用该电路测量空气中针板电极上的PD值。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Design of ultrawide band partial discharge detector using Pi attenuator and ultrawide band amplifier

Detection of partial discharge (PD) in the frequency range ultrawide band (UWB) provides some benefits such as in a more accurate observation of the PD pulse shape and the PD frequency spectrum. One method to measure the PD signals in the UWB frequency range is by using the PD detecting impedance circuit. The 50 ohm detecting impedance is used as a coupling device to maximize power transfer of PD current. This paper design the matching impedance circuit comprising an impedance detector as attenuator and UWB amplifier as a signal amplifier. S-parameter characteristics of the circuit is simulated in software Advanced Design System (ADS) software. The PD detecting circuit is made and it is tested using Vector Network Analyzer (VNA) instruments. Then, the circuit is used to measure PD on the needle — plates electrode in the air.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2017 International Seminar on Intelligent Technology and Its Applications (ISITIA)

自引率

0.00%

发文量