[Durability of bonding between 4-META/MMA-TBB resin to dentin pretreated with 10-3. The effect of 10-3 pretreating period and subsequent glutaraldehyde treatment].

Adhesion durability between dentin pretreated with 10-3 and 4-META/MMA-TBB resin was studied. Reduction of etching periods with 10-3 was not so effective as expected. The weakening of bond strength during immersion in water at 37 degrees C to the dentin pretreated for 1 sec occurred faster than those for either 5 sec or 10 sec. The strength decreased from 12 MPa at 1 day to 9 MPa at 3 months, 3 MPa at 6 months and finally 2 MPa at 1 year in the case of 1 sec pretreated dentin. On the other hand, the strength became half after the storage in water for 1 year in the cases of 5 and 10 sec pretreated dentins. Combination of 10-3 pretreatment and subsequent glutaraldehyde treatment could stabilize the decrease but not completely. SEM and TEM examinations suggested that dentinal collagen exposed by the etching but not entangled and impregnated by poly (4-META-co-MMA) easily deteriorated by water during the longer immersion. Collagen modified with 10-3 and then with glutaraldehyde was also changed by the longer immersion.